Toshiba EM1-31076EE, SL-9000N-FFH-CA, SL-9000N-FFH-US Error Message Table, Cause, Solution

15. ERROR MESSAGE TABLE

						15. ERROR MESSAGE TABLE
● Label lssue Mode
	Message	Cause				Solution
	DATA ENTRY ERROR	Error in key input.	Press the C key, and re-input the right
			data.
	PLU NOT FOUND	The PLU # being called out is	Press the C key, and check the PLU #.
		not registered.
	TOTALS OVERFLOW	GRAND TOTAL or PLU TOTAL	Press the C key, then the						ESC.		key and
		memory has been exceeded at	select ‘RESET’.			Then sum up the
		the time of issuing a label.	exceeded memory.
	MEMORY WILL BE	The machine judges the	Press the C key, then the					ESC.		key and
	FULLED	memory is full before	select ‘RESET’.			Then sum up the
		designated number of media	exceeded memory.
		are printed in Batch mode.
	PLU DATA ERROR	Error in the PLU data.	Press the C key, and reprogram PLU
			data.
	PRT FAILURE DETECTED	Printer trouble.	1. Check that the label and print head are
		Media end.	set correctly.
			2. If the label home position is misaligned,
			press the		FEED		key.
	LABEL OVER RUN	Label overruns.	Press the	FEED		key.
● Report and Reset Mode
	Message	Cause				Solution
	PLU NOT FOUND	Corresponding PLU # is not	Press the C key, and enter the correct
		registered.	PLU #.
	PRT FAILURE DETECTED	Printer trouble.	Same as in the label issue mode.
	LABEL OVER RUN	Label overruns.	Press the	FEED		key.

15- 2