Panasonic HC-V700 Copying, Change the mode to, Touch desired items following the screen display

Copying

≥If there is not much remaining capacity in the SD card, a confirmation message asking to copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.

≥Refer to page 111 for approximate time for copying.

1 Change the mode to .

≥Use a sufficiently charged battery or the AC adaptor.

2 Select the menu.

MENU : [COPY]

[	]			When copying from the SD card to the built-in memory
[	]			When copying from the built-in memory to the SD card
[	CONVERT FORMAT]			This will convert the recording format and copy from the
				built-in memory to the SD card.
[		]		This will convert the scene recorded in AVCHD on the built-
				in memory to MP4 (640k360/30p) and copy to the SD
				card.
[			]	This will convert the scene recorded in 1080/60p on the
				built-in memory to 1080/60i and copy to the SD card.

≥When there are relay-recorded scenes in the built-in memory, a message appears on the screen. Touch [YES] and copy after combining relay-recorded scenes to the SD card. (l 98)

3 Touch desired items following the screen display.

≥ It will return to the previous step by touching .

≥(When [SELECT SCENES] is selected)

When touched, the scene/still picture is selected and the indication appears on the thumbnail. Touch the scene/still picture again to cancel the operation.

≥(When [SELECT DATE] is selected)

When touched, the date is selected and surrounded by red. Touch the date again to cancel the operation.

≥Up to 99 scenes/still pictures or 99 dates can be set in succession.

≥If 2 or more SD cards are necessary to copy, change the card following the instructions on the screen.

4 Touch [EXIT] when the copy complete message is displayed.

≥The thumbnail view of the copy destination is indicated.

When you stop copying halfway

Touch [CANCEL] while copying.

110

VQT3Y41