Connecting with a HDMI mini cable

Select the desired method of HDMI output.

MENU : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]

[AUTO] determines the output resolution automatically based on information from the connected TV.

If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please read the operating instructions for the TV.)

Image will not display on TV for a few seconds in the following cases.

jWhen the 1080/60p recording mode is turned on/off during Motion Picture Recording Mode

jWhen you touch the play mode select icon to select [1080/60p], and then touch [ENTER]

during Playback Mode.

jWhen the play mode selection is set to in the Playback Mode, and it is switched between the 3D still picture and the 2D still picture.

jWhen the 1080/60p, 1080/60i, or side-by-side scenes are switched.

Connecting with the AV multi cable

Select the desired setting of AV multi connector output.

MENU : [SETUP] # [AV MULTI] # desired setting

[COMPONENT]: When connecting to the component terminal

[AV OUT]: When connecting to the video terminal

Changing the component output setting

MENU : [SETUP] # [COMPONENT OUT] # desired setting

[1080i]: When connecting to the component terminal on the TV compatible with 1080i.

(Playback is in high definition quality.)

[480i]: When connecting to the component terminal on the TV compatible with 480i. (Playback is in standard quality.)

Set [VIDEO LIGHT] to [OFF] when recording with the TV connected to the component terminal to confirm the recording. (l 60)

103

VQT3Y41

Page 103
Image 103
Panasonic HC-V700M owner manual Connecting with a Hdmi mini cable, Connecting with the AV multi cable, 103