44
VQT3Y41
2 Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start standby mode.
≥The lens cover does not close.
3 Open the LCD monitor.
The status indicator A lights red and the unit is pu t
into recording pause.
≥Quick Start Standby Mode is canceled if
jabout 5 minutes have elapsed
jmode is set to
≥Depending on the recording conditions and menu settings, time for Quick Start may be
longer than 0.6 seconds.
≥It may take some time for Automatic White B alance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (l43)/[ECONOMY (AC)] (l43), close the LCD monitor once and open it again.
≥Turn the unit off using the power button.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l141)
You can change the operation icons to display in the Touch Menu.
Register 3 favorite operation icons.
≥The default settings are, (Fade), (PRE-REC) and (Video Light) for Motion
Picture Recording Mode, and (Built-in flash), (Self-timer) and (Backlight
Compensation) for Still Picture Recording Mode.
1 Touch [SELECT OPERATION ICONS].
2 Touch the operation icon you would like to change to cancel the setting.
3 Touch the operation icon to be set.
≥Name of the function is displayed by touching and holding on the operation icon.
≥To cancel, touch the operation icon again.
4 Touch [ENTER].
≥For details about the function of each operation icon, refer to page 55.
[ALERT SOUND] / /[OFF]
(Volume low)/ (Volume high)
[SELECT OPERATION ICONS]
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 44 ページ ２０１１年１２月２８日 水曜日 午前１０時２１分