Toshiba EM1-31076, SL-9000N-FFH-CA, SL-9000N-FFH-US, SL-9000N-FFH-QR, SL-9000-FFH-US Lon System

10. PROGRAMMING PROCEDURES

10.15 LON SYSTEM

10.15 LON SYSTEM

Menu Page: 2

Item No.: 4

The SL-9000 scales which consists of a master, satellites, and a backup master are connected each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.

ID# 1 is reserved for the master terminal.

ID# 2 is reserved for the backup master terminal or satellite terminal. ID# 3 to 32 are for satellite terminals.

Setting numbers other than the above results in an error.

m

<MENU>

Page 2

4

◇

CHANGE	ID #
PLU		ENTER

IN-LINE ↔ OFF-LINE

ID#: 1

Set the number of scales in the system.

ENTER

DLL? Yes n

No

p

PROG.

<MENU>

Page 2

ESC.

m

Main

<MENU>

NOTES:

1.Before starting the above procedure, press the key and enter IN-LINE mode.

2.When installing the backup master terminal, set the master scale’s initial status of #9-1 to 1.

3.Set ID # to all scales connected by LON cable.

4.When the display power is turned on, a satellite terminal is ready to receive data from the master terminal.

5.After setting the ID #, turn the power switch OFF and ON again.

10-24