Toshiba SL-9000N-FFH-US Option, Order from TOSHIBA TEC Parts Center or purchase locally

2.SPECIFICATION

2.2 OPTION

2.2	OPTION
	Option Name		Model No.	Description		Source
			or Part No.
		LON Connector	Part No.	A modular connector used to connect scales		See
		TM8P-88P	EAJ-0028001	to each other in a LON configuration.		Note 2
		LON Terminal	Part No.	A modular resistor attached to the scales		See
			EAJ-0029001	connected at both ends of the LON		Note 2
		Resistor 285D-8P
LON				configuration.
		LON Cable	Part No.	An 8-pin telephone cable used with the LON		See
			10319100003	connectors attached	to both ends of the	Note 2
		S-STLAN-2P
				cable. This cable connects scales to each
		(200 m/roll)
				other in a LON configuration.
			OP-9000-IOB	An I/O board equipped with the TMCC		See
		I/O PC Board		interface. It is used to construct a TMCC		Note 1
TMCC				system.
		TMCC Cable kit	OP-9000-IOCN-	A cable kit for the TMCC interface.		See
			TMCC			Note 1
			OP-9000-	This board is used to expand the PLU		See
MEMO PC Board			PIGGYBACK	memory to 4MB by installing the memory		Note 1
(SL-9000 only)			OP-9000-	module.
			PIGGYBACK-S/F
			OP-9000-RAM-	DIP type PS-RAM to be installed on the		See
			512KB	MEMO PC board (OP-9000-PIGGYBACK) for		Note 1
				memory expansion.	When expanding the	and 3
Memory Module				memory, install the two modules as one set.
			OP-9000-SRAM-	DIP type S-RAM to be installed on the MEMO
			512KB	PC board (OP-9000-PIGGYBACK-S/F) for
				memory expansion. When expanding the
				memory, install the two modules as one set.
			----------	Please locally purchase a power cord of		See
Power Cord				proper length for the installation location.		Note 1
				Power cord shall be a standardized article of
				each destination.
10 Base T (LAN) Interface			OP-9000N-LAN	This board enables the SL-9000N to be used		See
Board	(SL-9000N only)			in a LAN network.		Note 1
LAN Cable Kit (SL-9000N			OP-9000N-LAN-	This kit is required when installing the OP-		See
			FFH	9000N-LAN (LAN Interface Board) on the SL-		Note 1
only)
				9000N-FFH.

NOTES:

1.Contact TOSHIBA TEC H.Q. or your nearest TOSHIBA TEC representative.

2.Order from TOSHIBA TEC Parts Center or purchase locally.

3.When purchasing memory modules locally, select one having the following specifications.

■Maker: HITACHI Pseudo Static RAM (OP-9000-RAM-512KB) HITACHI Static RAM (OP-9000-SRAM-512KB)

■Type: HM658512ALP-8V 80 ns, 600 mil 32-pin Plastic DIP (DP-32) (OP-9000-RAM-512KB) HM628512ALP-770ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-SRAM-512KB)

4.The MEMO PC Board (with Flash ROM) is installed in the SL-9000N model as standard.

2- 2