Manuals / Toshiba / Personal Care / Scale

Toshiba SL-9000-FFH-QR In-Line/Local, Transmission Delay Time Table, Programming Procedures

Models: SL-9000N-FFH-CA EM1-31076EE

1 92

Download 92 pages 5.15 Kb

Page 44

10.14 IN-LINE/LOCAL

10. PROGRAMMING PROCEDURES

10.14 IN-LINE/LOCAL

10.14 IN-LINE/LOCAL

Menu Page: 2

Item No.: 3

When the SL-9000 is used as a satellite in an in-line system, the “ID #” and “Transmission delay time” can be set by the following procedure.

<MENU>

Page 2

3

◇	TMCC
◇
Select mode

Set ID numbers (Range: 0 to 255)

ENTER

lOFF-line

The transmission delay time can be set when in-line system is selected for TMCC.

(Refer to Table 5)

ENTER

l

PROG.

ESC.

<MENU>

Page 2

Main

<MENU>

NOTES:

1.The TMCC baud rate is fixed to 4800 BPS.

2.After setting the ID #, turn the power switch OFF and ON again.

3.This setting is not available in case that the Initial setting #13-6 is set to 1 (LAN: allowed).

■Table 5: Transmission Delay Time Table

	TR-Time	(ms)		TR-Time (ms)

1	20 to	39	6	120 to 139
2	40 to	59	7	140 to 159
3	60 to	79	8	160 to 179
4	80 to	99	9	180 to 199
5	100 to	119

The default is 3.

10-23

Image 44

Toshiba SL-9000-FFH-QR, EM1-31076 In-Line/Local, Transmission Delay Time Table, Programming Procedures, TR-Time ms

Contents

TEC Electronic Computing Scale SL-9000/9000N-FFH-US/CA/QROwner’s Manual Page TABLE OF CONTENTS PASSWORD SECURITY OPERATING PROCEDURESERROR MESSAGE TABLE CLEANING THE PRINT HEADPage 1. INTRODUCTION 1. INTRODUCTION1.2 ACCESSORIES 1.1 APPLICABLE MODELS L - 9 0 0 3 0 M2. SPECIFICATION 2. SPECIFICATION2.1 SCALE 2. Order from TOSHIBA TEC Parts Center or purchase locally OPTION2. SPECIFICATION 3. APPEARANCE 4. DISPLAY 4.1 US TYPESL-9000N SL-9000N4.2 CA/QR TYPE SL-9000NSL-9000N 4. DISPLAY5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARDProgramming Keyboard Function 5. KEY LAYOUT5. KEY LAYOUT Name of KeyFunction Other Keys5.2 OPERATION KEYBOARD AND SPEED KEYBOARD Operation Keyboard Function5. KEY LAYOUT Name of KeyPRESET Operation Keyboard Function5. KEY LAYOUT Name of Key6. PROCEDURE BEFORE OPERATION NOTE For details of the programming menus, refer to SectionPlatter 7. INSTALLATION PROCEDUREScale installation on the wall or ceiling 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL Page Password Input SECURITY Menu RESET MenuReturn to each mode 9. OUTLINE OF OPERATION10. PROGRAMMING PROCEDURES How to access to Programming MenuTitle and Contents of Programming Menu Title and Contents of Programming Menu10. PROGRAMMING PROCEDURES How to enter characters 10.1 PLU DATA EDIT Menu Page Item No10.2 PLU DATA SETTING 10. PROGRAMMING PROCEDURES10.2 PLU DATA SETTING TESTkey advances to the next menu. Pressing the ↑ W Weigh, F Fix, B By-count C Compulsory, Blank Not compulsory10.3 INGREDIENT MESSAGE 10.4 NUTRITION SETTING 1. When a selected PLU# is not stored in the PLU file, an error occurs Set the Daily Value Table Deleting Nutrition Data Memory file sort10. PROGRAMMING PROCEDURES Area for entry data Set in this menu Nutrition Setting procedure10.5 PLU VERIFYING LABEL Menu Page Item No Verifies PLU data stored in the scale10.6 ADDRESS AND COMMERCIAL MESSAGE SETTING 10.6 ADDRESS AND COMMERCIAL MESSAGE SETTINGEnter the message No. and the display time 10.7 COMBINATION MESSAGE10. PROGRAMMING PROCEDURES 3. Display method varies depending on message construction 10.8 SPECIAL INFORMATION 10.9 Grade Line1. Print position of grade line can be changed by initial setting 10. PROGRAMMING PROCEDURES10. PROGRAMMING PROCEDURES 10.10 SPEED KEY SETTINGSetting Department/Vendor Number 10.11 PRINT FORMAT Issue methodSelect the Item for adjustment 1 gradation =0.154 mm 1 dot On-demandFormat No Table 2 Label Format Number Table10. PROGRAMMING PROCEDURES CMT Operations 10.12 DATE/TIME SETTING10.13 CMT/PL-3 Table 3 Error code during PL-3 PL-3 OperationTable 4 Transmission Item List Be careful of the following when changing a FDKTo cancel to change a FDK, press the CLEAR key 10. PROGRAMMING PROCEDURES10.14 IN-LINE/LOCAL Table 5 Transmission Delay Time Table10. PROGRAMMING PROCEDURES TR-Time10.15 LON SYSTEM Data Transmission 10.16 BAR CODE FORMAT Default Bar Code Format10. PROGRAMMING PROCEDURES Example① Check digit C/D is at other than digit-13 10.17 TITLES NOTE Title No. and format of the additional information area10.18 TRANSFERRING LOGO DATA NOTE Two sizes of logos are printed differently as follows10.19 IDIOM SETTING Table 6 Error message during data transmission10.20 VENDOR SETTING 10. PROGRAMMING PROCEDURES10.20 VENDOR SETTING Deleting a vendor number10.21 FREE FORMAT SETTING Key functions1. The following print items cannot be magnified 1 LOGOs 5. The following items cannot be rotated ① LOGO 0, 0 → 10. PROGRAMMING PROCEDURES8. Print coordinate REPORT 11. PROGRAMMED DATA VERIFICATION REPORTSMenu Set the data range of each programmed data verification report 11. PROGRAMMED DATA VERIFICATION REPORTSSet the entire PLU # Set the individual PLU #. Ex. PLU #10012. PASSWORD SECURITY 12. PASSWORD SECURITY12.1 SETTING PASSWORD AND PROTECT MENU 1. Select validity of the password by pressing the key 12.2 CALLING MENU BY ENTERING PASSWORD 12. PASSWORD SECURITYRESET Enter the 4-digit Password13. OPERATING PROCEDURES How to access REG., M.DOWN, or REWRAP menu13. OPERATING PROCEDURES 13.1 WEIGHING OPERATIONMenu REG., M.DOWN, or REWRAP Mode WEIGH 13.2 FIX PRICE OPERATION FOR US TYPE ONLY 13.3 BY COUNT OPERATION 13.3 BY COUNT OPERATION13. OPERATING PROCEDURES 13.3 BY COUNT OPERATIONEnter the PLU # Press Enter quantity Press Enter quantity Press ex. ①13.4 PRINT COUNT OPERATION 13. OPERATING PROCEDURESPRESET COUNT 13.4 PRINT COUNT OPERATION13. OPERATING PROCEDURES When all the specified numbers of labels are being issued13.4 PRINT COUNT OPERATION The specified numbers ofThe nutrition information label is issued in the following methods 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT FOR US TYPE ONLY 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT FOR US TYPE ONLY4. Weight data is shifted to the left 13-11 13.6 TARE/SAVE FUNCTION PROCEDURESTare % 13.7 CALLING AND PRINTING GRADE LINES REG. MANU. BY-COUNTDONUTS ← Commodity Name13.8 CALLING AND PRINTING LOGOS 13. OPERATING PROCEDURES 13.9 SELECTING PRINT ITEMMenu REG, M.DOWN, or REWRAP Mode WEIGH, FIX, or BY COUNT The date can be changed temporarily Menu REG., M.DOWN, or REWRAP 13.10 DATE CHANGEMode WEIGH, FIX, or BY COUNT 13.11 BATCH PRINT MODE with 30 Items Run Assignment 13. OPERATING PROCEDURES13.11 BATCH PRINT MODE with 30 Items Run Assignment REG. MANU. BY-COUNT ITEM#01 000001 CNT=13. OPERATING PROCEDURES 13.11 BATCH PRINT MODE with 30 Items Run AssignmentUnit Price Change and G.Line/LOGO Call 13-17Label Issue Stop or Cancel 13-19 13.12 VISUAL COMMODITY LIBRARYProceed to basic operation 13.13 FLOATING VENDOR 13.13 FLOATING VENDOR13. OPERATING PROCEDURES Price deletionSubtotal 14. TOTAL OPERATION How to access REPORT or RESET menu14.1 HOURLY TOTAL REPORT 14.2 GRAND TOTAL REPORT14.3 PLU TOTAL REPORT Ex. REPORT Menu14.4 VENDOR TOTAL REPORT 15. ERROR MESSAGE TABLE Programming Mode15. ERROR MESSAGE TABLE SolutionSolution Message15. ERROR MESSAGE TABLE CMT Operation ModeSolution Solution16. CLEANING THE PRINT HEAD 17. TROUBLESHOOTING Before You Call for Service17. TROUBLESHOOTING ProblemsPage E PRINTED IN SINGAPORE EM1-31076E