Panasonic VV-1303, VV-2003 Timer Recording, Repeat to set, Programming, Press To select

Timer Recording

You can set up to 8 programs to be recorded while you are away.

1 Press PROG to display SET PROGRAM screen.

2				SET PROGRAM			1) Press	to select
							TIMER
			T I MER PROGRAMMING
			ON TIMER				PROGRAMMING.
							2) Press	to display
							screen.
		SELECT :			SET :		• If a program is already in
		END		: PROG			memory, press		, and to
							select an unused program
							number.
3	DATE			START	STOP	CH	Press	to select
							and or	to set the
		7 FRI		--:--	--:--	--
	TODAY					SP	recording DATE.
	------------------------						• 1~31 = One time
		SELECT :			SET :		• DAILY = MON~FRI
							• WEEKLY SUN~SAT
		END		: PROG			= Same time once a week

Example		8	9	31	1	2	6
Today’s	7	SELECT		/	Selection Order			DAILY
Date		WEEKLY		WEEKLY			WEEKLY
			(SAT)		(MON)		(SUN)

Repeat step 3 to set:

•Start time, Stop time

•Channel (or LINE for outside source)

•Speed (SP, LP, SLP)

Check List

Cable or antenna is connected. Power cord is plugged in.

The clock is set to correct time. The tape is long enough.

The record tab is in place.

PROG TIMER indicator

4

P DT START		STOP	CH SPD
1	day 9 : 00p	12 : 00a	08	SP
2	-- -- : --	-- : --	--	--
3	-- -- : --	-- : --	--	--
4	-- -- : --	-- : --	--	--
	CANCEL : ADD / DLT
	SELECT :	SET :
	END : PROG

Press PROG to end the program.

To Enter More Programs,

press to select and to set a blank program number, and then repeat step 3.

Press PROG twice to exit this mode.

5 • If you’re using a cable box, make sure that it is tuned to the desired channel and the power is left on for timer recording.

• PROG TIMER indicator lights on the unit.

20 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com