Manuals / Toshiba / Personal Care / Scale

Toshiba SL-9000-FFH-US, SL-9000N-FFH-CA Print Count Operation, Operating Procedures, Preset Count

Models: SL-9000N-FFH-CA EM1-31076EE

1 92

Download 92 pages 5.15 Kb

Page 67

13.4 PRINT COUNT OPERATION

13. OPERATING PROCEDURES

13.4 PRINT COUNT OPERATION

13.4 PRINT COUNT OPERATION

With this procedure, a specified number of the same labels can be issued.

Menu: REG., M.DOWN, or REWRAP

Mode: WEIGH, FIX or BY-COUNT

Example A) When operating in Weigh mode.

Press :

PRESET

COUNT

Set the number of labels. (Max. 99 labels)

5

0

Press :

*

Enter the PLU #.	3	0	9	1

Press :	PLU
PLU data is saved.	SAVE

Place a commodity on the platter.

(Ex. 0.700 lb.)

MANUAL :	: AUTO
	*

©

Remove the commodity.

Clear the preset count.

C

Press :

*

Batch

The label is issued with the backing paper attached.

On-demand

The label is issued.

When all the specified numbers of the labels are being issued.

	©
NOTES:
1.	A batch issue means to print labels continuously with the backing paper attached. On-demand
	issue means to print label one by one.
2.	To check the remaining number, clear the PLU and press the	PRESET COUNT	key.

13- 6

Image 67

Toshiba SL-9000-FFH-US, SL-9000N-FFH-CA, SL-9000N-FFH-US Print Count Operation, Operating Procedures, Preset Count

Contents

Owner’s Manual SL-9000/9000N-FFH-US/CA/QRTEC Electronic Computing Scale Page TABLE OF CONTENTS CLEANING THE PRINT HEAD PASSWORD SECURITYOPERATING PROCEDURES ERROR MESSAGE TABLEPage 1. INTRODUCTION 1. INTRODUCTION3 0 M 1.2 ACCESSORIES1.1 APPLICABLE MODEL S L - 9 0 02.1 SCALE 2. SPECIFICATION2. SPECIFICATION 2. SPECIFICATION OPTION2. Order from TOSHIBA TEC Parts Center or purchase locally 3. APPEARANCE SL-9000N 4. DISPLAY4.1 US TYPE SL-9000N4. DISPLAY 4.2 CA/QR TYPESL-9000N SL-9000N5. KEY LAYOUT 5. KEY LAYOUT5.1 PROGRAMMING KEYBOARD Programming Keyboard FunctionOther Keys 5. KEY LAYOUTName of Key FunctionName of Key 5.2 OPERATION KEYBOARD AND SPEED KEYBOARDOperation Keyboard Function 5. KEY LAYOUTName of Key PRESETOperation Keyboard Function 5. KEY LAYOUTNOTE For details of the programming menus, refer to Section 6. PROCEDURE BEFORE OPERATIONScale installation on the wall or ceiling 7. INSTALLATION PROCEDUREPlatter 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL Page 9. OUTLINE OF OPERATION Password InputSECURITY Menu RESET Menu Return to each modeHow to access to Programming Menu 10. PROGRAMMING PROCEDURES10. PROGRAMMING PROCEDURES Title and Contents of Programming MenuTitle and Contents of Programming Menu How to enter characters Menu Page Item No 10.1 PLU DATA EDITTEST 10.2 PLU DATA SETTING10. PROGRAMMING PROCEDURES 10.2 PLU DATA SETTINGW Weigh, F Fix, B By-count C Compulsory, Blank Not compulsory key advances to the next menu. Pressing the ↑10.3 INGREDIENT MESSAGE 10.4 NUTRITION SETTING 1. When a selected PLU# is not stored in the PLU file, an error occurs Set the Daily Value Table Area for entry data Set in this menu Nutrition Setting procedure Deleting Nutrition DataMemory file sort 10. PROGRAMMING PROCEDURESMenu Page Item No Verifies PLU data stored in the scale 10.5 PLU VERIFYING LABEL10.6 ADDRESS AND COMMERCIAL MESSAGE SETTING 10.6 ADDRESS AND COMMERCIAL MESSAGE SETTING10. PROGRAMMING PROCEDURES 10.7 COMBINATION MESSAGEEnter the message No. and the display time 3. Display method varies depending on message construction 10. PROGRAMMING PROCEDURES 10.8 SPECIAL INFORMATION10.9 Grade Line 1. Print position of grade line can be changed by initial settingSetting Department/Vendor Number 10.10 SPEED KEY SETTING10. PROGRAMMING PROCEDURES On-demand 10.11 PRINT FORMATIssue method Select the Item for adjustment 1 gradation =0.154 mm 1 dot10. PROGRAMMING PROCEDURES Table 2 Label Format Number TableFormat No 10.13 CMT/PL-3 10.12 DATE/TIME SETTINGCMT Operations PL-3 Operation Table 3 Error code during PL-310. PROGRAMMING PROCEDURES Table 4 Transmission Item ListBe careful of the following when changing a FDK To cancel to change a FDK, press the CLEAR keyTR-Time 10.14 IN-LINE/LOCALTable 5 Transmission Delay Time Table 10. PROGRAMMING PROCEDURES10.15 LON SYSTEM Data Transmission Example 10.16 BAR CODE FORMATDefault Bar Code Format 10. PROGRAMMING PROCEDURES① Check digit C/D is at other than digit-13 NOTE Title No. and format of the additional information area 10.17 TITLESNOTE Two sizes of logos are printed differently as follows 10.18 TRANSFERRING LOGO DATATable 6 Error message during data transmission 10.19 IDIOM SETTINGDeleting a vendor number 10.20 VENDOR SETTING10. PROGRAMMING PROCEDURES 10.20 VENDOR SETTINGKey functions 10.21 FREE FORMAT SETTING1. The following print items cannot be magnified 1 LOGOs 5. The following items cannot be rotated ① LOGO 8. Print coordinate 10. PROGRAMMING PROCEDURES0, 0 → Menu 11. PROGRAMMED DATA VERIFICATION REPORTSREPORT Set the individual PLU #. Ex. PLU #100 Set the data range of each programmed data verification report11. PROGRAMMED DATA VERIFICATION REPORTS Set the entire PLU #12.1 SETTING PASSWORD AND PROTECT MENU 12. PASSWORD SECURITY12. PASSWORD SECURITY 1. Select validity of the password by pressing the key Enter the 4-digit Password 12.2 CALLING MENU BY ENTERING PASSWORD12. PASSWORD SECURITY RESETHow to access REG., M.DOWN, or REWRAP menu 13. OPERATING PROCEDURESMenu REG., M.DOWN, or REWRAP Mode WEIGH 13.1 WEIGHING OPERATION13. OPERATING PROCEDURES 13.2 FIX PRICE OPERATION FOR US TYPE ONLY 13.3 BY COUNT OPERATION 13.3 BY COUNT OPERATIONex. ① 13. OPERATING PROCEDURES13.3 BY COUNT OPERATION Enter the PLU # Press Enter quantity Press Enter quantity Press13.4 PRINT COUNT OPERATION 13.4 PRINT COUNT OPERATION13. OPERATING PROCEDURES PRESET COUNTThe specified numbers of 13. OPERATING PROCEDURESWhen all the specified numbers of labels are being issued 13.4 PRINT COUNT OPERATIONThe nutrition information label is issued in the following methods 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT FOR US TYPE ONLY 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT FOR US TYPE ONLY4. Weight data is shifted to the left Tare % 13.6 TARE/SAVE FUNCTION PROCEDURES13-11 ← Commodity Name 13.7 CALLING AND PRINTING GRADE LINESREG. MANU. BY-COUNT DONUTS13.8 CALLING AND PRINTING LOGOS Menu REG, M.DOWN, or REWRAP Mode WEIGH, FIX, or BY COUNT 13.9 SELECTING PRINT ITEM13. OPERATING PROCEDURES Mode WEIGH, FIX, or BY COUNT 13.10 DATE CHANGEThe date can be changed temporarily Menu REG., M.DOWN, or REWRAP REG. MANU. BY-COUNT ITEM#01 000001 CNT= 13.11 BATCH PRINT MODE with 30 Items Run Assignment13. OPERATING PROCEDURES 13.11 BATCH PRINT MODE with 30 Items Run Assignment13-17 13. OPERATING PROCEDURES13.11 BATCH PRINT MODE with 30 Items Run Assignment Unit Price Change and G.Line/LOGO CallLabel Issue Stop or Cancel Proceed to basic operation 13.12 VISUAL COMMODITY LIBRARY13-19 13.13 FLOATING VENDOR 13.13 FLOATING VENDORSubtotal Price deletion13. OPERATING PROCEDURES How to access REPORT or RESET menu 14. TOTAL OPERATIONEx. REPORT Menu 14.1 HOURLY TOTAL REPORT14.2 GRAND TOTAL REPORT 14.3 PLU TOTAL REPORT14.4 VENDOR TOTAL REPORT Programming Mode 15. ERROR MESSAGE TABLEMessage 15. ERROR MESSAGE TABLESolution SolutionSolution 15. ERROR MESSAGE TABLECMT Operation Mode Solution16. CLEANING THE PRINT HEAD Problems 17. TROUBLESHOOTINGBefore You Call for Service 17. TROUBLESHOOTINGPage E PRINTED IN SINGAPORE EM1-31076E