Manuals / Toshiba / Personal Care / Scale

Toshiba SL-9000N-FFH-QR, SL-9000N-FFH-CA, SL-9000N-FFH-US, SL-9000-FFH-US Transferring Logo Data

Models: SL-9000N-FFH-CA EM1-31076EE

1 92

Download 92 pages 5.15 Kb

Page 50

10. PROGRAMMING PROCEDURES

10.18 TRANSFERRING LOGO DATA

10.18 TRANSFERRING LOGO DATA

Menu Page: 2

Item No.: 8

Logo data is created on a PC and stored into RAM through the CMT interface. Two different sizes of logos, 320x118 dots and 256x64 dots, are available on the SL-9000 series. 64 KB of RAM area is secured for logo data, in which the maximum of 13 logos (320x118 dots) or 26 logos (256x64 dots) can be stored.

Before starting the following operation, set the initial setting #10-7 to 1.

<MENU>

Page 2

			Select a transmission item.
8	Load the tape into		1:	SAVE (SL-9000→CMT)
8	the CMT Loader		2:	VERIFY (SL-9000=CMT)
	the CMT Loader		2:	VERIFY (SL-9000=CMT)
			3:	LOAD (SL-9000←CMT)
ENTER	PROG.	<MENU>
ENTER	PROG.	Page 2
		Page 2
	ESC.	Main
	ESC.	<MENU>
		<MENU>

NOTE: Two sizes of logos are printed differently as follows:

Print LOGO (320 x 118 dots)

<Display>

64

256

(Part of LOGO is displayed.)

80

<Label>

1st LOGO

160

2nd LOGO

<Receipt>

Display LOGO (256 x 64 dots)

(Part of LOGO is

printed.)

104

118

256 64

FSP LOGO (Part of LOGO is overlapped with FSP print area.)

1st LOGO (LOGO is printed on the center of printing area.)

160

64

2nd LOGO

(Part of LOGO is

SL-9000N only

(LOGO #1 & half of LOGO #2 are printed.

: Logo data

: Print/Display area

printed.)

FSP LOGO (LOGO is printed on part of FSP print area.)

SL-9000N only

10-29

Image 50

Contents

TEC Electronic Computing Scale SL-9000/9000N-FFH-US/CA/QROwner’s Manual Page TABLE OF CONTENTS ERROR MESSAGE TABLE PASSWORD SECURITYOPERATING PROCEDURES CLEANING THE PRINT HEADPage 1. INTRODUCTION 1. INTRODUCTIONS L - 9 0 0 1.2 ACCESSORIES1.1 APPLICABLE MODEL 3 0 M2. SPECIFICATION 2. SPECIFICATION2.1 SCALE 2. Order from TOSHIBA TEC Parts Center or purchase locally OPTION2. SPECIFICATION 3. APPEARANCE SL-9000N 4. DISPLAY4.1 US TYPE SL-9000NSL-9000N 4.2 CA/QR TYPESL-9000N 4. DISPLAYProgramming Keyboard Function 5. KEY LAYOUT5.1 PROGRAMMING KEYBOARD 5. KEY LAYOUTFunction 5. KEY LAYOUTName of Key Other Keys5. KEY LAYOUT 5.2 OPERATION KEYBOARD AND SPEED KEYBOARDOperation Keyboard Function Name of Key5. KEY LAYOUT PRESETOperation Keyboard Function Name of Key6. PROCEDURE BEFORE OPERATION NOTE For details of the programming menus, refer to SectionPlatter 7. INSTALLATION PROCEDUREScale installation on the wall or ceiling 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL Page Return to each mode Password InputSECURITY Menu RESET Menu 9. OUTLINE OF OPERATION10. PROGRAMMING PROCEDURES How to access to Programming MenuTitle and Contents of Programming Menu Title and Contents of Programming Menu10. PROGRAMMING PROCEDURES How to enter characters 10.1 PLU DATA EDIT Menu Page Item No10.2 PLU DATA SETTING 10.2 PLU DATA SETTING10. PROGRAMMING PROCEDURES TESTkey advances to the next menu. Pressing the ↑ W Weigh, F Fix, B By-count C Compulsory, Blank Not compulsory10.3 INGREDIENT MESSAGE 10.4 NUTRITION SETTING 1. When a selected PLU# is not stored in the PLU file, an error occurs Set the Daily Value Table 10. PROGRAMMING PROCEDURES Deleting Nutrition DataMemory file sort Area for entry data Set in this menu Nutrition Setting procedure10.5 PLU VERIFYING LABEL Menu Page Item No Verifies PLU data stored in the scale10.6 ADDRESS AND COMMERCIAL MESSAGE SETTING 10.6 ADDRESS AND COMMERCIAL MESSAGE SETTINGEnter the message No. and the display time 10.7 COMBINATION MESSAGE10. PROGRAMMING PROCEDURES 3. Display method varies depending on message construction 1. Print position of grade line can be changed by initial setting 10.8 SPECIAL INFORMATION10.9 Grade Line 10. PROGRAMMING PROCEDURES10. PROGRAMMING PROCEDURES 10.10 SPEED KEY SETTINGSetting Department/Vendor Number Select the Item for adjustment 1 gradation =0.154 mm 1 dot 10.11 PRINT FORMATIssue method On-demandFormat No Table 2 Label Format Number Table10. PROGRAMMING PROCEDURES CMT Operations 10.12 DATE/TIME SETTING10.13 CMT/PL-3 Table 3 Error code during PL-3 PL-3 OperationTo cancel to change a FDK, press the CLEAR key Table 4 Transmission Item ListBe careful of the following when changing a FDK 10. PROGRAMMING PROCEDURES10. PROGRAMMING PROCEDURES 10.14 IN-LINE/LOCALTable 5 Transmission Delay Time Table TR-Time10.15 LON SYSTEM Data Transmission 10. PROGRAMMING PROCEDURES 10.16 BAR CODE FORMATDefault Bar Code Format Example① Check digit C/D is at other than digit-13 10.17 TITLES NOTE Title No. and format of the additional information area10.18 TRANSFERRING LOGO DATA NOTE Two sizes of logos are printed differently as follows10.19 IDIOM SETTING Table 6 Error message during data transmission10.20 VENDOR SETTING 10.20 VENDOR SETTING10. PROGRAMMING PROCEDURES Deleting a vendor number10.21 FREE FORMAT SETTING Key functions1. The following print items cannot be magnified 1 LOGOs 5. The following items cannot be rotated ① LOGO 0, 0 → 10. PROGRAMMING PROCEDURES8. Print coordinate REPORT 11. PROGRAMMED DATA VERIFICATION REPORTSMenu Set the entire PLU # Set the data range of each programmed data verification report11. PROGRAMMED DATA VERIFICATION REPORTS Set the individual PLU #. Ex. PLU #10012. PASSWORD SECURITY 12. PASSWORD SECURITY12.1 SETTING PASSWORD AND PROTECT MENU 1. Select validity of the password by pressing the key RESET 12.2 CALLING MENU BY ENTERING PASSWORD12. PASSWORD SECURITY Enter the 4-digit Password13. OPERATING PROCEDURES How to access REG., M.DOWN, or REWRAP menu13. OPERATING PROCEDURES 13.1 WEIGHING OPERATIONMenu REG., M.DOWN, or REWRAP Mode WEIGH 13.2 FIX PRICE OPERATION FOR US TYPE ONLY 13.3 BY COUNT OPERATION 13.3 BY COUNT OPERATIONEnter the PLU # Press Enter quantity Press Enter quantity Press 13. OPERATING PROCEDURES13.3 BY COUNT OPERATION ex. ①PRESET COUNT 13.4 PRINT COUNT OPERATION13. OPERATING PROCEDURES 13.4 PRINT COUNT OPERATION13.4 PRINT COUNT OPERATION 13. OPERATING PROCEDURESWhen all the specified numbers of labels are being issued The specified numbers ofThe nutrition information label is issued in the following methods 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT FOR US TYPE ONLY 13.5 ISSUING LABELS WITH NET WEIGHT STATEMENT FOR US TYPE ONLY4. Weight data is shifted to the left 13-11 13.6 TARE/SAVE FUNCTION PROCEDURESTare % DONUTS 13.7 CALLING AND PRINTING GRADE LINESREG. MANU. BY-COUNT ← Commodity Name13.8 CALLING AND PRINTING LOGOS 13. OPERATING PROCEDURES 13.9 SELECTING PRINT ITEMMenu REG, M.DOWN, or REWRAP Mode WEIGH, FIX, or BY COUNT The date can be changed temporarily Menu REG., M.DOWN, or REWRAP 13.10 DATE CHANGEMode WEIGH, FIX, or BY COUNT 13.11 BATCH PRINT MODE with 30 Items Run Assignment 13.11 BATCH PRINT MODE with 30 Items Run Assignment13. OPERATING PROCEDURES REG. MANU. BY-COUNT ITEM#01 000001 CNT=Unit Price Change and G.Line/LOGO Call 13. OPERATING PROCEDURES13.11 BATCH PRINT MODE with 30 Items Run Assignment 13-17Label Issue Stop or Cancel 13-19 13.12 VISUAL COMMODITY LIBRARYProceed to basic operation 13.13 FLOATING VENDOR 13.13 FLOATING VENDOR13. OPERATING PROCEDURES Price deletionSubtotal 14. TOTAL OPERATION How to access REPORT or RESET menu14.3 PLU TOTAL REPORT 14.1 HOURLY TOTAL REPORT14.2 GRAND TOTAL REPORT Ex. REPORT Menu14.4 VENDOR TOTAL REPORT 15. ERROR MESSAGE TABLE Programming ModeSolution 15. ERROR MESSAGE TABLESolution MessageSolution 15. ERROR MESSAGE TABLECMT Operation Mode Solution16. CLEANING THE PRINT HEAD 17. TROUBLESHOOTING 17. TROUBLESHOOTINGBefore You Call for Service ProblemsPage E PRINTED IN SINGAPORE EM1-31076E