Lightolier specifications Lytecaster Recessed Downlighting 1004IC, Page 1 of, Features, Labels

Lytecaster® Recessed Downlighting  1004IC

	Page 1 of 1		5" Aperture 0Incandescent Convertible IC/Non-IC Frame-In Kit
7		1004ICN
1		(Integral Nail)		1004IC	Overall Length
				(Integral Screw)	1004IC/N: 9"

			13 3/4" MIN.		Overall Width	Frame-In Kit
					1004IC/N: 5 3/4"
			24” MAX.
2	5		3
6		4	Overall Height
			1004IC/N: 7 1/2"
				Top View		Reflector Trim

5" Aperture: Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.

Frame-In Kit	Reflector Trims — See Individual Reflector Trim Specification Sheets
			Open Downlight			Adjustable
	Anodized	Anodized	Satin	Baffles	Basic	Eyeball	Enclosed	Open	Wall
	Reflector	Cone	Cone		White		Diffusers	Wet Location	Washer
1004IC	1045	1012	1008	1005	1071	1022	1021*	1081CD	1085*
1004ICQ**	1046	1012NM	1008NM	1005NM		1022WH	1024*	1081WH
1004ICN	1046CD	1013	1010	1005WH		1082	1177LX
1004ICNQ**		1013BK	1010NM	1005BNM		1088	1178LX
		1013CD		1076		1088GW	1090*
		1013NM		1076WH		1088WH
		1013BKNM
		1013CDNM					* For Non-IC applications only.
		1013WH
							**Supplied with integral push-In wire connectors

Features

1.Housing: .032 (#20 ga.) aluminum. UL listed convertible IC/NON-IC. 2" vertical adjustment in ceiling. Can be removed for access to junction box and ceiling plenum. AirSeal® housing minimizes air leakage to less than 2 CFM at 1.57 PSF (or 75pa), which complies with Model Energy Code (Section 602.3.3) and Washington State Energy Code (Section 502.4) and reduces heat loss and condensation in ceiling.

2.Mounting Frame: .048 (#18 ga.) galvanized steel. Locks into position along length of mounting bars with locking spring and bendable slot. (3) slots 90° apart simplify alignment.

3.Junction Box: 2"X 4" X 3 1/2" (22 cu. in.) .032 (#22 ga.) galvanized steel. UL listed for maximum 6 (#12 ga.) 1004IC/N 90°C through branch circuit con- ductors. Integral cable clamps permit attachment of non-metallic (#12 or #14 ga.) Romex® cable without tools or additional connectors.

4.Mounting Bars: .059 (#16 ga.) galvanized steel. Bars pivot for easy attach- ment and wire-in below ceiling line. Bars extend to accommodate 16" to 24" O.C. joist spacing. The 1004IC features integral self-tapping philips screws for secure attachment to wood or metal construction. The 1004ICN features integral nails for secure attachment to wood. Both attach to T-bar ceilings without the need of accessories.

5.Socket Housing: Impact extruded aluminum or galvanized steel. Attached trim retaining spring secures trim to any height on housing wall.

6.Socket: Porcelain medium base: nickel plated screw shell. Pre-wired with #18 ga. SF1 (300 VOLT 200° C) leads to junction box.

7.Thermal Protector: Meets NEC and UL requirements. Located inside housing.

Options & Accessories

AirSeal® Kit: LAS56

NOTE: Use only if factory installed tape or knockouts are removed from vertical adjustment slots in housing wall.

Labels

UL (Type IC/NON-IC Convertible; Suitable for Damp Locations)

Complies with Air Leakage Requirements stated in the Model Energy Code and the Washington State Energy Code.

AirSeal® is a registered trademark of Lightolier.

Romex® is a registered trademark of General Cable Industries Inc.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2007 Genlyte Group LLC • I0407