Picture Image Adjustment, Normal Function | BOXLIGHT CP-33t specification

PICTURE IMAGE ADJUSTMENT

COMPUTER MODE

	PICTURE IMAGE ADJUSTMENT
	ADJUST PICTURE IMAGE MANUALLY
1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select
	IMAGE and press the SELECT button. Another dialog box
	PICTURE IMAGE ADJUSTMENT Menu will appear.
2	Press the POINT DOWN button and a red-arrow icon will
2	appear. Move the arrow to the item that you want to change by

pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button.

Fine sync.

Adjust the picture as necessary to eliminate flicker from the display. (From 0 to 255.)

Total dots

The number of the total dots in one horizontal period. Adjust the number to match your PC image.

White balance (Red / Green / Blue)

Move the arrow to the color that you want to adjust. Press POINT LEFT button to lighten the color, and press POINT RIGHT button to deepen the color. (From 0 to 63.)

Contrast

Press POINT LEFT button to decrease contrast, and press POINT

RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to adjust the image darker, and press

POINT RIGHT button to adjust brighter. (From 0 to 63.)

Each of the keys operates as follow.

Reset Recalls the data previously adjusted.

Stored Stores the adjusted data in the memory.

Quit Closes the PICTURE IMAGE ADJUSTMENT Menu.

Indicates the level of the item.

Move the arrow to the item and press

POINT RIGHT / LEFT button.

Close the PICTURE

IMAGE ADJUSTMENT

Menu.

NORMAL FUNCTION

The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit). The “Normal” display will be displayed on the screen for a few seconds.

Normal

27

Image 27

BOXLIGHT CP-33t manual Picture Image Adjustment, Adjust Picture Image Manually, Normal Function, Computer Mode, Fine sync

Contents

BOXLIGHT BOXLIGHT CP-33tUSER’S GUIDE RISK OF ELECTRIC SHOCK DO NOT OPEN SAFETY PRECAUTIONSTO THE OWNER INFORMATION TO THE USER IMPORTANT SAFETY INSTRUCTIONS 5 COMPUTER MODE TABLE OF CONTENTSFEATURES AND DESIGN SETTING Accessories FEATURES AND DESIGNImage Resolution Other Features NAME OF EACH PART OF THE PROJECTOR POWER CORD CONNECTORADJUSTABLE FEET AND FEET LOCK LATCHES PREPARATION ROOM LIGHT SETTING-UP THE PROJECTORADJUSTABLE FEET POSITIONING THE PROJECTOR VENTILATION PREPARATION CONNECTING THE AC POWER CORD PREPARATION MOVING THE PROJECTOR CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTOR S-VIDEO INPUT JACK VIDEO INPUT JACK CONNECTING THE PROJECTORCONTROL PORT CONNECTOR TERMINALS OF THE PROJECTOR CONNECTING TO THE VIDEO EQUIPMENT CONNECTING THE PROJECTORTerminals of the Projector Terminal CONNECTING TO THE COMPUTERTo connect to the computer, refer to the figure below Terminal Terminal MODE that you want to ing on the RESOLUTIONMAC ADAPTER Not supplied in the table below depend LASER POINTER FUNCTION OPERATION OF THE REMOTE CONTROLBEFORE OPERATION Left Side VOLUME BUTTON REMOTE CONTROL BATTERIES INSTALLATIONOperating Range 16.4’ 5 m 16.4’ 5 m READY INDICATOR TOP CONTROLS AND INDICATORSPOWER ON-OFF BUTTON LAMP INDICATOR WIRELESS REMOTE CONTROL HOW TO OPERATE ON-SCREEN MENUOPERATING ON-SCREEN MENU FLOW OF ON-SCREEN MENU MODE MENU SETTING MENUBEFORE OPERATION MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode MENU BAR IN MCI MODE Press MENU BUTTON while in MCI modeVIEW MENU TURNING ON THE PROJECTOR Power off?BASIC OPERATIONS TURNING ON / OFF THE PROJECTOR KEYSTONE ADJUSTMENT ADJUSTING THE IMAGEZOOM ADJUSTMENT FOCUS ADJUSTMENT BASIC OPERATION NO SHOW FUNCTION SOUND ADJUSTMENTSOUND VOLUME ADJUSTMENT SOUND MUTE ADJUSTMENT DIRECT OPERATION COMPUTER MODESELECTING COMPUTER MODE SELECTING COMPUTER SYSTEM COMPUTER MODE PC ADJUSTMENT Total dots ResetCloses the PC ADJUST Menu Total lines COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS NOTE Specifications are subject to change without noticeMAC LC13 Normal PICTURE IMAGE ADJUSTMENTADJUST PICTURE IMAGE MANUALLY NORMAL FUNCTION Closes the AUTO IMAGE ADJUSTMENT Menu PICTURE POSITION ADJUSTMENTCOMPUTER MODE AUTO IMAGE FUNCTION Starts the Auto Image Adjustment Digital Zoom PICTURE SCREEN ADJUSTMENTTrue Keystone Regular VIDEO MODESELECTING VIDEO MODE SELECTING COLOR SYSTEM Tint ADJUSTING THE PICTURE IMAGECloses the PICTURE IMAGE ADJUSTMENT Menu Color HOW TO LOAD THE MEMORY CARD INTO THE PROJECTOR MCI MODEOPERATING THE PC CARD SLOT Media Card Imager SELECTING MCI MODEAVAILABLE DATA AVAILABLE CARD Index and Page SHOW THE DATA IN THE MEMORY CARDINDEX SELECTION PAGE SELECTION WRITE DATA INTO THE MEMORY CARD ACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR Stores the adjusted data in the memory PICTURE IMAGE ADJUSTMENTADJUST THE PICTURE IMAGE MANUALLY Recalls the data previously adjusted Keystone INSTALL / REMOVE THE SMARTMEDIA SMARTMEDIA AND PC CARD ADAPTERIMPORTANT NOTE PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTER MCI MODE PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIA Blue back SETTINGSETTING MENU SELECTING LANGUAGE APPENDIX OPERATING WIRELESS MOUSEINSTALLATION OPERATING WIRELESS MOUSE CLEANING THE PROJECTION LENS MAINTENANCETEMPERATURE WARNING INDICATOR AIR FILTER CARE AND CLEANING ORDER REPLACEMENT LAMP APPENDIX LAMP REPLACEMENT INDICATORLAMP REPLACEMENT LAMP REPLACEMENT MONITOR TIMER TROUBLESHOOTING ProblemTry these Solution Remote Control Unit TECHNICAL SPECIFICATIONS Control Cable for ADB Port OPTIONAL PARTSControl Cable for Serial Port Type No. POA-MCSRL LIMITATION OR LIABILITY LIMITED WARRANTYWARRANTY LIMITATION AND EXCLUSION DISCLAIMER OR UNSTATED WARRANTIES