Graco PD163434A owner manual Adjusting Head Support/ Harness Straps

18.3Adjusting Head Support/ Harness Straps

Failure to properly adjust the harness

straps for your child

increases the risk of serious injury or death in the event of a sharp turn, sudden stop or crash.

•BEFORE adjusting the head support height, have your child lean forward slightly.

•Squeeze the red adjustment handle A on top of seat and pull head support up until it snaps into one of the 6 height positions.

•To lower, squeeze red adjustment handle and push head support down.

•CHECK to make sure it is securely snapped into one of the 6 height positions by pulling up on head support.

When using in rear-facingmode always use one of the bottom 3 height positions B.

When using in forward-facingmode always use one of the top 4 height positions B.

Refer to page 48 for harness strap

placement.49

A

B