Removing Seat Cover | Graco PD163434A specs

20.2 Removing Seat Cover

1.Store harness see “19.1 Storing Harness”, p. 50.

2.Remove elastic loops and butterfly

tabs from seat as indicated in Aand B.

3.Pull off cover taking care around the lock knobs, recline handle, level indicator and cup holder.

4.Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE

BLEACH.

5.To put the seat cover back on, reverse preceding instructions.

Elastic loops

2X

A

Butterfly

tabs

B

5

Image 58

Graco PD163434A owner manual Removing Seat Cover

Contents

Smart SeatTM Child Restraint Table of Contents REAR-FACING Page Properly Routing the Vehicle Seat Belt or Latch Page Never Attach two Latch connectors Page Page Register Your Child Restraint Model Number Manufactured Purchase Date Child Restraint Useful Life For Recall Information If You Need HelpCertification Second Hand Child Restraint Attaching Latch Storage Compartment Attaching Cupholder Click Features Page Base Page Height & Weight Limits Preterm or Low Birthweight Infants Rear-facing with base 5 to 40 lbs .2-18.1 Kg Forward-facing with base 20 to 65 lbs to 29.5 kg Booster Without base 30 to 100 lbs .6 to 45 kg Vehicle Seat Location Requirements Serious Injury or DEATH. Some seating Vehicle Seat Belt Requirements Safe Vehicle Seat Belt Systems With or Without Built-in Harness For Built-in Harness OnlyCombination Lap/Shoulder Belt with Combination Lap/Shoulder Belt with Retractor Unsafe Vehicle Belt SystemsLap Belts with Emergency Locking Retractor ELR Passive Restraint Lap or Shoulder Belt Mounted on Door Passive Restraint Lap Belt with Motorized Shoulder Belt What is LATCH? Latch Vehicle Lower Anchor Points Seat Crease Vehicle Top Tether Latch System REAR-FACINGFORWARD-FACING Installing Base Using Vehicle Seat Belt Belt VehicleLap Belt Installing Base Using Latch Belt must lay flat and not be twistedPage REAR-FACING Installation Locked FORWARD-FACING Installation Tether Tether USE Tether Storage Latch Storage Buckle Harness StrapsChest Clip Crotch Strap Bottom Body Support on certain models To prevent ejection in sudden stop or crash Harness Covers & Crotch Strap Cover on certain models To prevent serious head injury in sudden stop or crash Using Recline FORWARD-FACING Safety Check Placing Child in Child Restraint Chest Clip Buckle Check Harness System To prevent serious injury or death Adjusting Head Support/ Harness Straps Refer to page 48 for harness strap Placement.49 Booster Installation D19.1 Storing Harness Bottom Using Child Restraint in Booster Mode Page Head Support in Booster Mode , p Securing Child in Booster Seat and Vehicle Armrest Shoulder Belt Lap belt Adjusting Head Support in Booster Mode Adjusting Armrest Additional Information Removing Seat Cover Care and Maintenance Airplane Use Warranty,and Replacement Parts