
Table 6-1 Control-panel  messages (continued)
Control panel message | Description  | Recommended action  | 
  | 
  | 
  | 
Authentication Required | Authentication has been enabled for this  | 
  | feature or destination. A username and  | 
  | password are required.  | 
Type the user name and password, or contact the network administrator.
Authentication Required To Use This | A user name and password are required.  | Type the user name and password, or contact  | 
Feature | 
  | the network administrator.  | 
  | 
  | 
  | 
Check the glass and remove any paper To  | A digital send or copy job has been performed  | Remove the original document from the  | 
continue press Start | from the scanner glass, but the original  | scanner glass, and then press Start.  | 
  | document needs to be removed.  | 
  | 
  | 
  | 
  | 
Close flatbed cover during initialization | The scanner cannot initialize while the  | Close the scanner cover.  | 
  | scanner cover is open.  | 
  | 
  | 
  | 
  | 
Digital send communication error | An error has occurred during a digital send  | Contact the network administrator.  | 
  | task.  | 
  | 
  | 
  | 
  | 
Document feeder bin full | The document feeder (ADF) ouput bin is full.  | Remove all media from the document feeder  | 
  | 
  | (ADF) output bin.  | 
  | 
  | 
  | 
Document feeder cover open | The document feeder (ADF) cover is open.  | Close the document feeder (ADF) cover.  | 
  | 
  | Follow the instructions in the onscreen dialog  | 
  | 
  | box.  | 
  | 
  | 
  | 
Document feeder empty | The document feeder (ADF) does not contain  | Load paper in the document feeder (ADF)  | 
  | paper.  | input tray.  | 
  | 
  | 
  | 
Document feeder paper jam | Media is jammed in the document feeder  | Follow the instructions in the onscreen dialog  | 
  | (ADF).  | box. See Clear jams on page 75.  | 
  | 
  | 
  | 
Document feeder pick error | The document feeder (ADF) experienced an  | Make sure that your original contains no more  | 
  | error while picking media.  | than 50 pages. Follow the instructions in the  | 
  | 
  | onscreen dialog box.  | 
  | 
  | 
  | 
Flatbed Cover Open | The device scanner cover is open.  | Close the scanner cover.  | 
  | 
  | 
  | 
Folder list is full. To add a folder, you must  | The device limits the number of folders that  | Delete an unused folder to add a new folder.  | 
first delete a folder. | can be established.  | 
  | 
  | 
  | 
  | 
Front side optical system error | The scanner has experienced an error.  | To temporarily clear the message so you can  | 
  | 
  | send a fax or send   | 
  | 
  | message persists, contact an   | 
  | 
  | service or support provider. See the HP  | 
  | 
  | support flyer or go to www.hp.com/support/  | 
  | 
  | 9250c.  | 
  | 
  | 
  | 
HP digital sending: delivery error | A digital send job has failed and cannot be  | Send the job again.  | 
  | delivered.  | 
  | 
  | 
  | 
  | 
Jam in document feeder | Media is jammed in the document feeder  | Remove jammed media from the document  | 
  | (ADF).  | feeder (ADF). Follow the instructions in the  | 
  | 
  | onscreen dialog box, or see Clear jams  | 
  | 
  | on page 75.  | 
  | 
  | If the message persists after all jams have  | 
  | 
  | been cleared, a sensor might be stuck or  | 
  | 
  | broken. Contact an   | 
  | 
  | support provider. See the HP support flyer, or  | 
  | 
  | go to www.hp.com/support/9250c.  | 
  | 
  | 
  | 
LDAP server is not responding. Contact | The LDAP server has exceeded the time out  | Verify the LDAP server address. See Solve  | 
administrator. | value for an address request.  | |
  | 
  | network administrator.  | 
  | 
  | 
  | 
ENWW | 
 |