Use the control panel
The control panel has a VGA touchscreen that provides access to all device functions. Use the buttons and numeric keypad to control jobs and the device status. The LEDs indicate overall device status.
Control-panel layout
The control panel includes a touchscreen graphical display,
1 |
| Attention light |
| The Attention light indicates that the device has a condition that requires |
|
|
|
| intervention, such as an error message on the touchscreen. |
|
|
|
|
|
2 |
| Data light |
| The Data light indicates that the device is receiving data. |
|
|
|
|
|
3 |
| Ready light |
| The Ready light indicates that the device is ready to begin processing a job. |
|
|
|
|
|
4 |
|
| Turn the dial to control the brightness of the touchscreen. | |
|
|
|
|
|
5 |
| Touchscreen graphical display |
| Use the touchscreen to open and set up all device functions. |
|
|
|
|
|
6 |
| Numeric keypad |
| Use the keypad to type numeric values, such as a fax number. |
|
|
|
|
|
7 |
| Sleep button and light |
| If the device is inactive for a long period of time, it automatically enters Sleep |
|
|
|
| mode. To place the device into Sleep mode or to reactivate the device, press |
|
|
|
| the Sleep button. When the light is glowing, the device is in Sleep mode. |
|
|
|
|
|
8 |
| Reset button |
| Resets the job settings to factory or |
|
|
|
|
|
9 |
| Stop button |
| Stops the active job. While stopped, the control panel shows the options for |
|
|
|
| the stopped job (for example, if you press Stop while the device is |
|
|
|
| processing an |
|
|
|
| or resume the job). |
|
|
|
|
|
10 |
| Start button and light |
| Starts digital sending, or resumes a job that has been interrupted. When the |
|
|
|
| light is glowing, the device is ready to start scanning. |
|
|
|
|
|
12 Chapter 2 Control panel | ENWW |
