Installing the Refrigerator

In ThisSection

Page
Cleaning the refrigerator .......................... 5
Plugging In the refrigerator ....................... 5
i
I
If you want your refrigerator to work properly, you need to Install Itproperly. This section tells you
all you need to know to Install your refrigerator.
Page
Locatlng the refrigerator properly ............ 6
Leveling the refrigerator ............................ 6

Cleaning the refrigerator

Clean your refrigerator before using It, Ifnec-
essay/.See cleaning InstTuctlons on pages
21 and 22.
Remove the Consumer Buy Guide Label
and any shipping tape before using the
refrigerator.
To remove any remaining glue:
•Rub briskly with your thumb to make a ball,
then remove.
OR
• Soak area with liquid dishwashing detergent
before removing glue as described above.
IMPORTANT:DO NOTUSEsharp Instruments,
rubbing alcohol, flammable fluids or abrasive
cleaners. Thesecan damage the material.
See "important Safety Instructions" on page 3.
DO NOT REMOVEthe Tech Sheet fastened
under the refrigerator, behind the base grille.

Plugging inthe refrigerator

A 115 Volt, 60 Hz., AC only, 15 or 20 amp
fused and properly grounded electrical
supply isrequired. It Is recommended that a
separate circuit, serving only this appliance,
be provided.
Do not use an extension cord. Use a
receptacle which cannot be turned off with
a switch or pull chain. See Elecffical
Requirements and Grounding Instructions
Sheet In your Literature Package.
3-prong grounding
type wall receptacle
3-prong
grounding
i Power
core
Recommended grounding method
5