Grizzly g0669X owner manual

6.Slide the fine downfeed handwheel onto the shaft on the front of the head, as shown in

Figure 15.

Fine

Downfeed

Handwheel

Figure 15. Fine downfeed handle installed.

7.Slip the coarse downfeed handle onto the shaft located on the right side of the head, as shown in Figure 16.

Note: If necessary, use the set screw on the hub of the handle to adjust the ball bear- ing pressure until the handle can be easily installed and removed.

Hub

Coarse

Downfeed

Handle

Figure 16. Coarse downfeed handle installed.

G0669X Precision 10" x 54" VS Milling Machine

8.Attach each coolant return hose to the pipe elbow on the rear of the table, then secure the other end through the clamp on the base and over the drain screen, as shown in

Figure 17.

Pipe Elbow

Clamp &

Drain Screen

Figure 17. Coolant return hose installed (right

side shown).

9.Loosen the screw on the right side of the head shown in Figure 18, then, aligning the flat of the indicator rod with that of the hole, slide the rod into the hole from the bottom and retighten the screw.

Screw

Indicator Rod

Figure 18. Indicator rod installed (right side of

head shown).

-19-