Assembly
Required Tools: Screwdriver
WARNING
Never perform maintenance or assembly procedures with engine running, or serious personal injury may result.
blower application
Install Blower Pipes
1.Align grooves in straight pipe with pegs on blower housing and slide pipe onto housing.
2.Turn straight pipe clockwise to lock into place.
3.Align grooves in fan head nozzle with pegs on straight pipe and slide fan head nozzle onto straight pipe.
4.Turn fan head nozzle clockwise to lock into place.
ENGLISH
Vacuum/shredding application
Install Vacuum Tube and Bag Assembly
1.Turn knob (A) counter clockwise until hinged housing cover is free to open for vacuum tube installation.
2.Loosen screw (B). Do not remove clamp from blower housing.
3.While holding housing cover open, align arrow on vacuum tube with interlock switch (D), and install vacuum tube into blower housing. Secure vacuum tube with clamp (B). Clamp fits under slotted guides (C).
NOTE
Engine will not start/operate unless safety interlock switch (D) is activated by the vacuum tube.
4.Remove blower pipe assembly from unit.
A 
C
b
d
c 
