ENGLISH
1.STOP SWITCH - "SLIDE SWITCH" mounted on top of handle. Push forward to start and run. Slide back to stop.
2.THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, press trigger gradu- ally for best operating technique.
3.SPARK PLUG - Provides spark to ignite fuel mixture.
4.SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER
5.RECOIL STARTER HANDLE - Pull recoil handle slowly until starter engages, then quickly and firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.
6.SIDE HANDLE - Provides grip for right hand when vacuuming.
7.FUEL TANK CAP - Covers and seals fuel tank.
8.AIR CLEANER - Contains replaceable air filter element.
9.HOUSING COVER - Covers blade area and activates safety interlock switch when closed. Engine will not run if safety switch is not activated.
10. THROTTLE POSITION LEVER - Pull back to increase engine speed. Friction washers maintain throttle lever setting.
11.SHOULDER STRAP
12.VACUUM PIPE - Sucks in materials to be shredded.
13.DEBRIS BAG - Collects shredded material.
14.BLOWER PIPES - Twist lock design.
15. PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge
bulb an additional 4 or 5 times.
16. CHOKE - Choke is located on the side of the air cleaner. Move choke lever to "COLD START" (
) to close choke for cold starting. Move choke lever to "RUN" (
) position to open choke.
Contents
___ 1 - | Power Head | |
___ 1 - | Straight Pipe | |
___ 1 - | Pipe with Nozzle | |
___ 1 - | Suction Tube | |
___ 1 - | Elbow Pipe | |
___ 1 | - | Debris Bag |
___ 1 | - | Operator's Manual |
___ 1 | - | Warranty Registration Card |
___ 1 | - | |
