Contents
HAZARD DEFINITIONS | 2 |
PLEASE READ BEFORE PROCEEDING | 3 |
1. PREVENT COMBUSTION AIR CONTAMINATION | 4 |
2. MAINTENANCE SCHEDULE | 5 |
Maintenance Procedures | 6 |
Boiler Must Be Serviced and Maintained | 6 |
Check Boiler Area | 6 |
Check Pressure Temperature Gauge | 6 |
Check Vent Piping | 6 |
Check Air Piping | 6 |
Check Relief Valve | 6 |
Check Condensate Drain System | |
Check Air Vents | 8 |
Test Low Water Cutoff (if installed) | 8 |
Reset Button (low water cutoff) | 8 |
Check Boiler Piping (gas and water) | 8 |
Operate Relief Valve | 8 |
Shut Boiler Down | 8 |
3. OPERATING INSTRUCTIONS | 9 |
4. SMART SYSTEM CONTROL MODULE |
|
SMART SYSTEM Control Module | 10 |
Access Modes | 10 |
Saving Parameters | 10 |
General | 10 |
Temperature Settings | 11 |
Status Display Screens | |
Notes | 15 |
Revision Notes | Back Cover |
Hazard definitions
The following defined terms are used throughout this manual to bring attention to the presence of hazards of various risk levels or to important information concerning the life of the product.
DANGER
WARNING
CAUTION CAUTION
NOTICE
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
NOTICE indicates special instructions on installation, operation, or maintenance that are important but not related to personal injury or property damage.
2
