Lexmark MX310 manual Copying on both sides of the paper duplexing

Copying 60

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3From the printer control panel, navigate to:

> Copy > > Copy from > select the size of the original document

4Navigate to:

Copy to > > select the tray containing the paper size and type you want to use > > select the number of copies or enter a number on the keypad >

5If there are no trays that contain the paper size and type you want to use, then do the following:

aNavigate to:

Copy to > > Manual Feeder > > select the paper size > > select the paper type >

bLoad the size and type of paper into the multipurpose feeder, and then press .

Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow button

to scroll to Scan the Next Page, and then press .

6 Press the left or right arrow button to scroll to Finish the Job, and then press .

Copying on both sides of the paper (duplexing)

1Load a document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3From the printer control panel, navigate to:

> Copy > > Sides (Duplex) > select a duplex option > select the number of copies or enter a number on the keypad >

Notes:

•The first number refers to the original document. The second number refers to the copy. For example, select 2-sided to 2-sidedif you have two-sided original documents and you want two‑sided copies.

•If you want to copy another document, then place it on the scanner glass, press the left or right arrow

button to scroll to Scan the Next Page, and then press .

4 Press the left or right arrow button to scroll to Finish the Job, and then press .