Lexmark MX310 manual Maintenance kit low 80.xy, Maintenance kit nearly low 80.xy, Memory full

Troubleshooting 188

•Cancel the current job.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, select Continue to clear the message and

continue printing. For non‑touch‑screen printer models, press to confirm.

Maintenance kit nearly low [80.xy]

For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models,

press to confirm.

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, contact customer support at http://support.lexmark.com or your service representative.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Memory full, cannot print faxes

From the printer control panel, select Continue to clear the message without printing. For non‑touch‑screen printer

models, press to confirm.

Note: Held faxes will attempt to print after the printer restarts.

Memory full, cannot send faxes

1From the printer control panel, select Continue to clear the message and cancel the fax job. For non‑touch‑screen

printer models, press to confirm.

2Do either of the following:

•Reduce the fax resolution, and then resend the fax job.

•Reduce the number of pages in the fax, and then resend fax job.

Memory full [38]

Try one or more of the following:

•From the printer control panel, select Cancel job to clear the message. For non‑touch‑screen printer models, press

to confirm.

•Install additional printer memory.