Lexmark MX310 manual Copying on letterhead

Copying 58

3From the printer control panel, navigate to:

> Copy > > Copy from > select the size of the original document

4Navigate to:

Copy to > > select the tray containing the transparencies > > select the number of copies or enter a number on the keypad >

5If there are no trays that contain transparencies, then do the following:

aNavigate to:

Copy to > > Manual Feeder > > select the size of the transparencies > > Transparency >

bLoad transparencies into the multipurpose feeder, and then press .

Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow

button to scroll to Scan the Next Page, and then press .

6 Press the left or right arrow button to scroll to Finish the Job, and then press .

Copying on letterhead

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3From the printer control panel, navigate to:

> Copy > > Copy from > select the size of the original document

4Navigate to:

Copy to > > select the tray containing the letterhead > > select the number of copies or enter a number on the keypad >