Lexmark MX310 manual Finishing menu, Understanding printer menus 137

Understanding printer menus 137

Use

Resource Save

On

Off

To

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a job that requires more memory than is available.

Notes:

•Off is the factory default setting. This sets the printer to retain the downloads only until memory is needed. Downloads are deleted in order to process print jobs.

•On retains the downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full [38] appears, and downloads are not deleted.

Finishing menu

Use	To
Sides (Duplex)	Specify whether two‑sided (duplex) printing is set as the user default setting for all
1 sided	print jobs.
2 sided	Notes:
	• “1 sided” is the factory default setting.
	• You can set two‑sided printing from the software program.
	For Windows users:
	Click File > Print, and then click Properties, Preferences, Options, or Setup.
	For Macintosh users:
	Choose File > Print, and then adjust the settings from the print dialog and
	pop‑up menus.
Duplex Binding	Define the way two‑sided pages are bound and printed.
Long Edge	Notes:
Short Edge
	• Long Edge is the factory default setting. This assumes binding along the long
	edge of the page (left edge for portrait and top edge for landscape).
	• Short Edge assumes binding along the short edge of the page (top edge for
	portrait and left edge for landscape).
Copies	Specify the default number of copies for each print job.
1–999	Note: 1 is the factory default setting.
Blank Pages	Specify whether or not blank pages are inserted in a print job.
Do Not Print	Note: Do Not Print is the factory default setting.
Print
Collate	Stack the pages of a print job in sequence when printing multiple copies.
(1,1,1) (2,2,2)	Note: “(1,2,3) (1,2,3)” is the factory default setting.
(1,2,3) (1,2,3)