Lexmark MX310 Understanding printer menus 120, Press Sleep Button, Press and Hold Sleep Button

Understanding printer menus		120
	Use	To
	Print Recovery	Set the printer to automatically check for jammed paper.
	Jam Assist	Note: On is the factory default setting.
	On
	Off
	Print Recovery	Let the printer successfully print a page that may not have printed
	Page Protect	otherwise.
	Off	Notes:
	On	• Off is the factory default setting. This prints a partial page
		when there is not enough memory to print the whole page.
		• On sets the printer to process the whole page so that the
		entire page prints.
	Press Sleep Button	Determine how the printer, while in idle state, reacts to a short
	Do nothing	press of the Sleep button.
	Sleep	Note: Sleep is the factory default setting.
	Hibernate
	Press and Hold Sleep Button	Determine how the printer, while in idle state, reacts to a long press
	Do nothing	of the Sleep button.
	Sleep	Note: “Do nothing” is the factory default setting.
	Hibernate
	Factory Defaults	Return the printer settings to the factory default settings.
	Do Not Restore	Notes:
	Restore Now
		• Do Not Restore is the factory default setting. This keeps the
		user‑defined settings.
		• Restore Now returns all scanner settings to the factory
		default settings except Network/Ports menu settings. All
		downloads stored in the RAM are deleted.
	Custom Home Message	Create a custom home message that appears during warnings,
	Off	printer errors and the Home Prime/Status state.
	IP Address	Notes:
	Hostname	• The maximum number of characters for a custom message is
	Contact Name
		40 (NV 80 bytes). If the custom message requires more than
	Location
		2 lines, then normal scrolling behavior will occur.
	Zero Configuration Name
		• When the Home Prime/Status has a custom message and
	Custom Text [x]
		there is a warning with custom message, the Home
		Prime/Status condition is shown first.