Lexmark MX310 manual IPv6 menu, Understanding printer menus 111

Understanding printer menus		111
	Use	To
	Enable AutoIP	Specify the Zero Configuration Networking setting.
	Yes	Note: Yes is the factory default setting.
	No
	Enable FTP/TFTP	Enable the built-in FTP server, which lets you send files to the printer using File Transfer
	Yes	Protocol.
	No	Note: Yes is the factory default setting.
	Enable HTTP Server	Enable the built-in Web server (Embedded Web Server). When enabled, the printer
	Yes	can be monitored and managed remotely using a Web browser.
	No	Note: Yes is the factory default setting.
	WINS Server Address	View or change the current WINS server address.
	Enable DDNS	View or change the current DDNS setting.
	Yes	Note: Yes is the factory default setting.
	No
	Enable mDNS	View or change the current mDNS setting.
	Yes	Note: Yes is the factory default setting.
	No
	DNS Server Address	View or change the current DNS server address.
	Backup DNS Server Address	View or change the backup DNS server addresses.
	Backup DNS Server Address 2
	Backup DNS Server Address 3
	Enable HTTPS	View or change the current HTTPS setting.
	Yes	Note: Yes is the factory default setting.
	No

IPv6 menu

To access the menu, navigate to either of the following:

•Network/Ports > Standard Network > Standard Network Setup > IPv6

•Network/Ports > Network [x] > Network [x] Setup > IPv6

Note: This menu is available only in network printers or printers that are attached to print servers.

Use	To
Enable IPv6	Enable IPv6 in the printer.
On	Note: On is the factory default setting.
Off
Auto Configuration	Specify whether or not the wireless network adapter accepts the
On	automatic IPv6 address configuration entries provided by a router.
Off	Note: On is the factory default setting.