Lexmark MX310 manual Security menu, Security Audit Log menu, Understanding printer menus 114

Understanding printer menus		114
	Use		To
	SMTP Server Authentication		Specify the type of user authentication required for scan to e‑mail
	No authentication required		privileges.
	Login/Plain		Note: “No authentication required” is the factory default setting.
	CRAM‑MD5
	Digest‑MD5
	NTLM
	Kerberos 5
	Device‑Initiated E‑mail		Specify what credentials will be used when communicating to the SMTP
	None		server.
	Use Device SMTP Credentials		Notes:
	Device Userid		• None is the factory default setting for Device‑Initiated E‑mail.
	Device Password		• Device Userid and Device Password are used to log in to the SMTP
			server when Use Device SMTP Credentials is selected.
Security menu
Security Audit Log menu
	Use	To
	Export Log	Let an authorized user export the audit log.
		Notes:
		• To export the audit log from the printer control panel, a flash drive must be
		attached to the printer.
		• The audit log can be downloaded from the Embedded Web Server and saved
		on a computer.
	Delete Log	Specify whether or not audit logs are deleted.
	Yes	Note: Yes is the factory default setting.
	No
	Configure Log	Specify how and whether or not audit logs are created.
	Enable Audit	Notes:
	Yes
		• Enable Audit determines if events are recorded in the secure audit log and
	No
		remote syslog. No is the factory default setting.
	Enable Remote Syslog
		• Enable Remote Syslog determines if logs are sent to a remote server. No is the
	No
		factory default setting.
	Yes
		• Remote Syslog Facility determines the value used to send logs to the remote
	Remote Syslog Facility
		syslog server. 4 is the factory default setting.
	0–23
		• If the security audit log is activated, then the severity value of each event is
	Severity of events to log
		recorded. 4 is the factory default setting.
	0–7