Additional Safety Instructions For Mills

1.UNDERSTANDING CONTROLS. Make sure you understand the use and operation of all controls.

2.Safety accessories. Always use a chip guard in addition to your safety glasses or use a face shield when milling to reduce the risk of injury from flying chips.

3.WORK HOLDING. Before starting the machine, be certain the workpiece has been properly clamped to the table. NEVER hold the workpiece by hand during operation.

4.CHUCK KEY SAFETY. Always remove chuck key, drawbar wrench, and any service tools immediately after use.

5.SPINDLE SPEEDS. Select the spindle speed that is appropriate for the type of work and material. Allow the mill to gain full speed before beginning a cut.

6.POWER DISRUPTION. In the event of a local power outage during operation, turn OFF all switches to avoid possible sudden start up once power is restored.

7.STOPPING SPINDLE. DO NOT stop the spindle using your hand. Allow the spindle to stop on its own, or, in the case of an emergency, use the spindle brake.

8.CLEAN-UP.DO NOT clear chips by hand or compressed air. Use a brush or vacuum, and never clear chips while the spindle is turning.

9.BE ATTENTIVE. DO NOT leave mill run- ning unattended for any reason.

10.MACHINE CARE AND MAINTENANCE.

Never operate the mill with damaged or worn parts. Maintain your mill in proper working condition. Perform routine inspec- tions and maintenance promptly. Put away adjustment tools after use.

11.DISCONNECT POWER. Make sure the mill is turned off, disconnected from its power source and all moving parts have come to a complete stop before changing cutting tools, starting any inspection, adjustment, or main- tenance procedure.

12.AVOIDING ENTANGLEMENT. DO NOT wear loose clothing, gloves, or jewelry when operating mill. Tie back long hair and roll up sleeves.

13.TOOL HOLDING. Always use the proper tools for your operation. Make sure tools are held firmly in place.

14.CUTTING TOOL INSPECTION. Inspect drills and end mills for sharpness, chips, or cracks before each use. Replace dull, chipped, or cracked cutting tools immedi- ately. Handle new cutting tools with care. Leading edges are very sharp and can cause lacerations.

15.SPINDLE DIRECTION CHANGES. Never reverse spindle direction while the spindle is in motion.

16.EXPERIENCING DIFFICULTIES. If at any time you are experiencing difficulties per- forming the intended operation, stop using the machine! Contact our Technical Support at (570) 546-9663.

Like all machinery there is potential danger when operating this mill. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this mill with respect and caution to reduce the risk of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur.

G0669X Precision 10" x 54" VS Milling Machine

-11-

Page 12 Page 14
Page 13
Image 13
Grizzly g0669X owner manual Additional Safety Instructions For Mills, Machine Care and Maintenance
Page 12 Page 14

g0669X specifications

The Grizzly G0669X is a powerful and versatile tool designed for woodworkers and enthusiasts who demand precision and efficiency in their projects. This impressive machine combines advanced technology with user-friendly features to deliver superior performance, making it a standout choice for both hobbyists and professionals alike.

At the heart of the G0669X is its 3HP motor, which provides substantial power for a range of applications, from milling to crafting intricate designs. The robust motor enables the machine to handle various materials, including hardwoods and softwoods, effortlessly delivering clean and accurate cuts with every pass. Its table size is designed to offer ample workspace, allowing users to tackle larger projects without the need for constant repositioning.

One of the standout features of the G0669X is its digital readout. This advanced technology offers precise measurements and helps users achieve the exact specifications required for their projects. The readout improves efficiency and accuracy, reducing the margin for error and enhancing the overall quality of the work produced.

Another essential characteristic of the G0669X is its impressive range of speeds. With multiple speed settings, users can easily select the optimum speed for various tasks, whether it’s planing, joinery, or creating decorative edges. This versatility makes the G0669X an invaluable addition to any workspace, allowing it to adapt to the diverse needs of different projects.

The machine also features a heavy-duty cast iron construction, ensuring stability and durability during operation. The sturdy base minimizes vibrations, which contributes to smoother cuts and better overall performance. Additionally, the precision-ground table surface enhances the accuracy of cuts while providing a reliable and flat platform for workpieces.

Safety is a top priority for the Grizzly G0669X, which includes various safety features designed to protect users during operation. This includes emergency shut-off switches and blade guards, ensuring that users can work confidently and safely.

In conclusion, the Grizzly G0669X stands out in the world of woodworking machinery for its powerful motor, advanced digital readout, versatile speed settings, and robust construction. This machine brings precision, efficiency, and safety to the forefront, making it a go-to option for anyone looking to elevate their woodworking experience. Whether you are a seasoned professional or a passionate hobbyist, the G0669X is sure to meet and exceed your expectations, delivering exceptional results for every project.
Top Page Image Contents