Grizzly g0669X Coolant Reservoir, Checking/Adding Coolant, To check/add coolant, Tools Needed

Coolant Reservoir

Coolant is a potent and extremely poisonous solution to humans and animals. Use personal protective equipment when handling coolant to prevent infections or poisoning.

A small amount of coolant is lost during normal operation. Check the coolant reservoir regularly and fill it if necessary.

Checking/Adding Coolant
Tools Needed	Qty
Phillips Screwdriver	1
To check/add coolant:

1.DISCONNECT THE MILL FROM POWER!

2.Clean away debris and grime from the res- ervoir screen on the base of the mill, then remove it to inspect the level of coolant.

3.If the level of coolant is more than 2" below the top of the reservoir, add more coolant to fill the tank.

4.Replace the reservoir screen and make sure the fluid return hose is secured in position.

-40-

The coolant reservoir on this mill is designed to store only coolant. During storage some fluids grow dangerous microbes, or, due to the collection of toxic metal chips in the fluid, the fluid can become a potent and extremely poisonous solution to humans and animals.

Use the correct personal protection equip- ment when handling coolant to prevent infections and poisoning.

Follow Federal, State, and the coolant manu- facturer's requirements to properly dispose of used coolant.

NOTICE

Running the coolant pump without adequate coolant in the reservoir may permanently damage the coolant pump motor. This is considered abuse and is not covered by the warranty.

G0669X Precision 10" x 54" VS Milling Machine