2.0 | Floor Installation |
|
| |
|
| Using a utility knife, cut the long side of each wall slot |
| |
| B | b. tab and then use a rubber mallet and screwdriver to |
| |
| A | knock it completely out: |
| |
| • 4 places on Front Floor (A) |
| ||
|
| • 8 places on Repeat Floor (B) |
| |
Using a rubber mallet and |
|
| ||
a. screwdriver, punch out |
|
| ||
the screw holes along | 1. | B | ||
the connection edge | ||||
| ||||
of Repeat Floor (B). |
| |||
2.
B | A |
|
Using a rubber mallet and screwdriver, knock out the | Drill pilot hole through top surface of floor, 2 places on |
c. tabs for the door hinge, 2 places on Front Floor (A). | d. Front Floor (A). |
| CAUTION: Drill through top surface of floor only! |
A
A
