c. | Ensure Repeat Roof (M) is positioned against the back wall tongues. | AA (8) |
From outside the shed, install one Screw (AA) at each corner. | ||
| Hold the edge of the roof down firmly at the corners while installing each screw. |
|
| Install remaining screws into remaining locations of back walls. |
|
1.2.
Helpful Hint: Installation is easier using a magnetic bit or starting screws with a manual screwdriver to get seated. Pilot holes also may be drilled using 1/8" bit.
M
3.
d. From inside the shed, install four Screws (AA) into the roof, two on each side wall.
Note: The screws also have to go through the Roof Brace (RB) at each end to properly secure the roof!
A second person on the outside of the shed should hold down the edge of the roof firmly at each screw location.
AA (4)
M
RB
