Polycom Version 1.4.x 17 manual User Preferences userpreferences

Administrator Guide - SoundPoint® IP / SoundStation® IP Optimization

In the following table, x is the index of the region as specified by the x index of the lcl.cpt.menu.x attribute above, y is the chord set number and cat is one of cp or misc. For more information, see 4.6.1.5.1.1 Call Progress Patterns on page 75.

	Permitted
Attribute	Values	Interpretation
lcl.cpt.chord.cat.x.y.freq.z	0-1600	Frequency for this component in Hertz; up to four
		chord-set components can be specified (z=1, 2, 3,
		4).
lcl.cpt.chord.cat.x.y.level.z	-57 to 3	Level of this component in dBm0.
lcl.cpt.chord.cat.x.y.onDur	positive	On duration in milliseconds, 0=infinite.
	integer
lcl.cpt.chord.cat.x.y.offDur	positive	Off duration in milliseconds, 0=infinite.
	integer
lcl.cpt.chord.cat.x.y.repeat	positive	Specifies how many times the ON/OFF cadence
	integer	is repeated, 0=infinite.

4.6.1.2 User Preferences <user_preferences/>

Attribute	Permitted	Default	Interpretation
	Values
up.headsetMode	0,1	0	If set to 1, the headset will be selected as
			the preferred transducer after its first use
			until the headset key is pressed again;
			otherwise, handsfree will be selected
			preferentially over the headset.
up.useDirectoryNames	0,1	0	If set to 1, the name fields of directory
			entries which match incoming calls will
			be used for caller identification display
			and in the call lists instead of the name
			provided via network signaling.
up.oneTouchVoiceMail	0, 1	0	If set to 1, the voicemail summary dis-
			play is bypassed and voicemail is dialed
			directly (if configured).
up.welcomeSoundEnabled	0, 1	1	If set to 1, play welcome sound effect
			after a reboot.
up.welcomeSoundOnWarm-	0, 1	0	If set to 1, play welcome sound effect on
BootEnabled			warm as well as cold boots, otherwise
			only a cold boot will trigger the wel-
			come sound effect.

Copyright © 2004 Polycom, Inc 69