Polycom Version 1.4.x 17 manual Ring type ringType, Miscellaneous Patterns

Administrator Guide - SoundPoint® IP / SoundStation® IP Optimization

4.6.1.5.1.3 Miscellaneous Patterns

The following table maps miscellaneous patterns to their usage within the phone.

Miscellaneous	Use within phone
pattern number
1	new message waiting indication
2	new instant message
3	not used
4	local hold notification
5	positive confirmation
6	negative confirmation
7	welcome (boot up)

4.6.1.5.2 Ring type <ringType/>

Ring type is used to define a simple class of ring to be applied based on some creden- tials that are usually carried within the network protocol. The ring class includes attributes such as call-waiting and ringer index, if appropriate. The ring class can use one of four types of ring that are defined as follows:

ring	Play a specified ring pattern or call waiting indication
visual	Provide only a visual indication (no audio indication) of incoming call (no
	ringer needs to be specified).
answer	Provide auto-answer on incoming calla.
ring-answer	Provide auto answer on incoming call after a ring periodb.

a.Note that auto-answer on incoming call is currently only applied if there is no other call in progress on the phone at the time.

b.See note a.

In the following table, x is the ring class number. The x index needs to be sequential.

Attribute	Permitted Values	Interpretation
se.rt.enabled	0,1	Set to 1 to enable the ring type feature within
		the phone, 0 otherwise.

Copyright © 2004 Polycom, Inc 77