Polycom Version 1.4.x 17 manual Dial Plan dialplan, Routing routing

Administrator Guide - SoundPoint® IP / SoundStation® IP Optimization

4.6.2.1.4 Dial Plan <dialplan/>

Attribute	Permitted	Default	Interpretation
	Values
dialplan.impossibleMatch-	0, 1 or 2	0	If set to 0, the digits entered up to
Handling			and including the point where an
			impossible match occurred are sent
			to the server immediately.
			If set to 1, give reorder tone.
			If set to 2, allow user to accumulate
			digits and dispatch call manually
			with the Send soft key.
dialplan.removeEndOfDial	0, 1	1	If set to 1, strip trailing # digit from
			digits sent out.

4.6.2.1.4.1 Digit Map <digitmap/>

Attribute	Permitted Values	Default	Interpretation
dialplan.digitmap	string compatible with	[2-9]110T	When this attribute is
	the digit map feature	011xxx.T	present, number-only
	of MGCP described in	[0-1][2-	dialing during the setup
	2.1.5 of RFC 3435.	9]xxxxxxxxx	phase of new calls will
	String is limited to 512	[2-9]xxxxxxxxx	be compared against the
	bytes and 20 seg-	[2-9]xxxT	patterns therein and if a
	ments; a comma is		match is found, the call
	also allowed; when		will be initiated automat-
	reached in the digit		ically eliminating the
	map, a comma will		need to press Send.
	turn dial tone back on.
dialplan.digitmap.timeOut	positive integer	3	Timeout in seconds for
			‘T’ feature of digitmap.

4.6.2.1.4.2 Routing <routing/>

This configuration section allows the user to create a specific routing path for outgoing SIP calls independent of other ‘default’ configuration.

Copyright © 2004 Polycom, Inc. 119