Polycom Version 1.4.x 17 Port port, RTP RTP Attribute Permitted Default Interpretation Values

Administrator Guide - SoundPoint® IP / SoundStation® IPOptimization

Attribute	Permitted	Default	Interpretation
	Values
tcpIpApp.sntp.daylightSavings.stop.date	1-31	1	Day of the month to
			start DST.
tcpIpApp.sntp.daylightSavings.stop.time	0-23	2	Time of day to stop
			DST, in 24 hour clock.
			2= 2 am, 14=2 pm
tcpIpApp.sntp.daylightSavings.stop.dayOf-	1-7	1	Day of week to stop
Week			DST. 1=Sun, 2=Mon,
			..., 7=Sat
tcpIpApp.sntp.daylightSavings.stop.dayOf-	0, 1	1	If set to 1 and fixedDay-
Week.lastInMonth			Enable=0, stop DST on
			the last day of the week
			(specified by dayOf-
			Week) in the month,
			rather than the first in
			the month.

a.Both tcpIpApp.sntp.address and tcpIpApp.sntp.gmtOffset can be provided via DHCP. If so, the DHCP parameters will override the parameters in ipmid.cfg.

4.6.1.8.3port <port/>

4.6.1.8.3.1 RTP <RTP/>

Attribute	Permitted	Default	Interpretation
	Values
tcpIpApp.port.rtp.filterByIp	0, 1	1	If set to 1, reject RTP pack-
			ets arriving from (sent from)
			a non-negotiated (via SDP)
			IP address.
tcpIpApp.port.rtp.filterByPort	0, 1	0	If set to 1, reject RTP pack-
			ets arriving from (sent from)
			a non-negotiated (via SDP)
			port.
tcpIpApp.port.rtp.forceSend	Null, 1024-	Null	When non-Null, send all
	65534		RTP packets to, and expect
			all RTP packets to arrive on,
			the specified port. Note:
			both tcpIpApp.port.rtp.filter-
			ByIp and tcpI-
			pApp.port.rtp.filterByPort
			must be enabled for this to
			work.

90 Copyright © 2004 Polycom, Inc.