Panasonic WJ-RT416V Configure the display settings Display Setup, Status Display, Default All

Configure the display settings [Display Setup]

	Display Setup
Status	Display
		All
Sequence Dwell
		05	Sec
Camera	Allocation Setup
		Set
	OK	Cancel

■Status Display

Determine which information is to be displayed. All: All information will be displayed.

Status: The status icons and time and date will be dis- played.

Name: The camera title and time and date will be dis- played.

Play: Time and date of the recorded images currently being played will be displayed.

Off: No information will be displayed.

Default: All

Note:

Error information will be displayed regardless of the set- ting.

■Sequence Dwell

Set the dwell time of the sequential display (interval of switching from a camera channel to the next camera chan- nel).

5 - 30 (sec) Default: 5 (sec)

■Camera Allocation Setup

Allocate the camera channels to the areas of multi-screen (4/6/9). Move the cursor to the desired area of multi-screen and determine the camera channel to be allocated to the selected area using the camera selection buttons (1-10/0).

			Camera Allocation Setup
4-screen A				4-screen B						4-screen C				4-screen D
01		02			05			06		09		10		13	14
03		04			07			08		11		12		15	16
6-screen A							6-screen B						9-screen
	01		02			07					08		01	02	03
			03								09		04	05	06
04		05	06			10			11		12		07	08	09
		OK											Cancel

Default: As shown in the illustration above.

Important:

•The area allocated for camera channel 1 is impossible to change.

•The same camera channel cannot be allocated to two or more areas of the same multi-screen.

61