Panasonic WJ-RT416V manual Default None Stop Bit, Select a stop bit from the following bit/2 bit

■Baud Rate

Select the communication speed for data transmission with a connected device from the following.

2 400/4 800/9 600/19 200/38 400 bps Default: 9 600

■Data Bit

The data bit will be displayed. It is impossible to change the value for this setting.

8(bit)

■Parity

Select a method to check a transmission error at com- munication from the following.

None: No parity check

Even: Even parity

Odd: Odd parity

Default: None

■Stop Bit

Select a stop bit from the following. 1 bit/2 bit

Default: 1 (bit)

■Retry Timing

Select a retransmission interval for when data reception is not confirmed from the following.

Off/100 ms/200 ms/400 ms/1 000 ms Default: Off

■Alarm Data

Select a method to inform the connected controller of an event occurrence from the following.

Off: Does not function.

0s: Informs the controller every time an event is detect- ed.

1s/5s: Informs the controller when a specified time has passed after detecting an event.

Default: 1 s

■Camera Number Setup

It is possible to assign a number to each camera chan- nel to operate cameras using the controller compatible with PS·Data.

Do the following to assign numbers to the camera chan- nels.

(1)Move the cursor onto "Set" next to "Channel No." and press the [SET] button.

The "Channel No." menu will be displayed.

	Camera Number Setup
Port	Cam	Port		Cam
1	001	2		002
3	003	4		004
5	005	6		006
7	007	8		008
9	009	10		010
11	011	12		012
13	013	14		014
15	015	16		016
	OK		Cancel

(2)Assign a camera number (to be operated using the controller) for each camera port using the camera selection buttons.

(3)After completing the camera number assignment, move the cursor onto [OK] and press the [SET] but- ton.

65