![](/images/new-backgrounds/1054852/5485261x1.webp)
MOXA AirWorks | Web Console Configuration |
LAN Computers
This area of the screen continually updates to show all DHCP enabled computers and devices connected to the LAN side of your Access Point. The detection “range” is limited to the address range as configured in DHCP Server. Computers that have an address outside of this range will not appear. If the DHCP Client (i.e. a computer configured to “Automatically obtain an address”) supplies a Host Name then that will also be shown. Any computer or device that has a static IP address that lies within the detection “range” may show, however its host name will not.
Wireless
The wireless section allows you to view the wireless clients that are connected to your wireless Access Point.
MAC Address
The Ethernet ID (MAC address) of the wireless client.
IP Address
The
Mode
The transmission standard being used by the client. Values are 11a, 11b, or 11g for 802.11a, 802.11b, or 802.11g respectively.
Rate
The actual transmission rate of the client in megabits per second.
Signal
This is a relative measure of signal quality. The value is expressed as a percentage of theoretical best quality. Signal quality can be reduced by distance, by interference from other