Moxa Technologies AWK-1200-AP Overview, Package Checklist, Product Features, System Requirements

MOXA AirWorks AWK-1200-AP User’s Manual Introduction

Overview

The AWK-1200 Access Point/Bridge and AP Client is ideal for applications that are hard to wire, too expensive to wire, or use mobile equipment that connects to a TCP/IP network. The AWK-1200 series is rated to operate at temperatures ranging from -20 to 70°C, and its weatherproof design allows you to set up a WLAN, or extend existing wired networks to outdoor locations. In addition, you do not need to worry about setting up a power supply for outdoor applications, since the AWK-1200’s PoE (Power over Ethernet) design makes it easy to deploy.

Package Checklist

The product package contains the following items.

yAWK-1200-AP

yPower cord

y48 VDC, 0.38A Inline Power Injector (PoE)

y30 m RJ45 CAT-5 Ethernet cable

y1.8 m RJ45 CAT-5 cross-over cable

y3 m grounding wire

yDocument and Software CD

yWall/mast mounting kit

yBand clamp

yTwo 5dBi Omni-type antennas (N-type connector)

Product Features

yOutdoor enclosure in compliance with versatile industrial IP (Ingress Protection) level covering IP68

yRF transmit power: 802.11b mode @ 11 Mbps data rate

yRF transmit power: 802.11g mode @ 54 Mbps data rate

ySupports 48 VDC 0.38A Power-over-Ethernet (PoE)

yMIB-I support

yMAC address based access control

System Requirements

Installing the AWK-1200-AP requires the following:

yWindows-based PC/AT compatible computer (PC system requirements: better than PIII 800 or

other 100% compatible equipment; OS: Windows 2000/XP), or Ethernet data device that has an RJ45 Ethernet port to run the configuration program or a TCP/IP connection to the Ethernet network.

y10/100 Base-T Ethernet RJ45 Ethernet cable for connecting to an Ethernet network.

yAC power outlet (100 to 240V, 50 to 60 Hz) to supply power.

1-2