■Rear View
w q
|
| e r ty |
| ui o |
|
| !0 |
| !1 |
| !2 |
| !3 !4 !5 | !6 | ||||
|
|
|
| RS485(CAMERA) |
|
|
|
|
|
|
|
| 5 | 3 | 1 |
| ||
| AUX IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| POWER |
|
|
|
| SERIAL |
|
|
|
|
|
|
|
| AUDIO IN/ALARM OUT |
|
|
| ON |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| OFF |
| |||
|
|
|
|
|
| 1 2 |
|
|
|
|
|
|
|
| 6 | 4 | 2 |
|
AUDIO OUT MONITOR1 | MONITOR2 |
| DATA |
|
| COPY1 |
| ALARM IN/CONTOROL |
|
| AUDIO IN | SIGNAL GND |
| |||||
| MODE |
|
|
|
|
|
| |||||||||||
IN | 16 | 15 | 14 | 13 |
| 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AC IN |
|
| 16 | 15 | 14 | 13 |
| 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
|
|
|
|
|
|
|
|
|
| VIDEO |
|
|
|
|
|
|
|
|
|
!8
qAudio out connector (AUDIO OUT)
Audio will be output from this connector. Audio being input to the AUDIO IN/ALARM OUT terminal or to the AUDIO IN connectors will be output. When playing recorded images, audio recorded with the images will be output.
wAux in connector (AUX IN)
Use for audio communication between the recorder and the PC (remote talk). Audio from the microphone con- nected to this connector will be input.
eMonitor 1 connector (BNC) (MONITOR1)
Images from the cameras connected to the VIDEO IN connectors will be output.
rSerial terminal
tMonitor 2 terminal
yRS485 port (RS485 (CAMERA))
Connect an RS485 combination camera to this port.
uData port (DATA)
Connect a PS·Data compatible device to this port.
iMode switch (MODE)
Use to determine the operational mode of this recorder. (☞ page 47)
oNetwork port (10/100BASE-T)
Connect a LAN cable between this port and the net- work port of a PC. When the recorder is connected with a network correctly, the link indicator beside the port will light orange. When data flows through the network port, the access indicator beside the port will blink green.
!7
!0Copy 1 port (COPY1)
When an external recording device is connected to this port, images recorded on the
!1Audio in/Alarm out terminal
IN/ALARM OUT)
Connect an alarming device such as a buzzer or an alarm lamp to this terminal. When a device such as a microphone amplifier is connected, audio from it will be input. Audio being input to this terminal will be output from the AUDIO OUT connector of the unit and the con- nected PC.
!2Alarm in/Control terminal
IN/CONTROL)
Connect an alarming device such as a sensor or a door switch to this terminal.
!3Audio in connectors (RCA) (AUDIO IN, 1 - 6)
This connector is the
!4Signal ground terminal (SIGNAL GND)
Connect a grounding wire between this terminal and the signal ground terminal of the other device in the system.
Otherwise, it may cause oscillation or noise.
!5Power button (POWER ON/OFF)
When this button is pressed and the power is turned on, the unit starts operation.
When this button is pressed again and the power is turned off, operation stops.
!6Cooling fan
When the temperature inside the unit becomes high, this fan starts automatically.
13