Stop power supply to the HDD | Panasonic WJ-RT416V instruction

Stop power supply to the HDD

When replacing the HDD, it is necessary to stop power supply to the HDD in advance. Contact your dealer when it is necessary to replace the HDD.

Screenshot 1

Display the "Disk Management" window (☞ page 33).

				Disk Management
		No.	Capacity			Used		Hour Meter

	1		232.884GB			232.250GB		400h
	2		232.884GB			232.250GB		389h
	3		Disk Access Error
	4		232.884GB			000.008GB		400h
	5			No Disk Detected
	6			No Disk Detected

[REC]:Start Format				[STOP]:Change HDD

		All Format			Information			Return

Step 1

Move the cursor onto any of No.1 - 6, and then press the [STOP] button.

→The confirmation window will be displayed. Move the cursor onto "OK", and then press the [SET] button. Power supply to the HDD corresponding to the indica- tion "Disk Access Error", "Data Error", "Disk Type Unfitting" or "Disk Unacknowledged" will be cut.

Screenshot 2

The following message window will be displayed after around 30 seconds.

Replace HDD

HDD1 HDD3 HDD5

HDD2 HDD4 HDD6

The power supply of the HDD have been turned off. Replace the HDD and press [SET] button to turn on again.

OK

Step 2

Replace the HDD. Contact your dealer when it is necessary to replace the HDD.

Step 3

When completing the HDD replacement, press the [SET] button.

Screenshot 3

The "Disk Management" window will be displayed again.

				Disk Management
		No.	Capacity			Used		Hour Meter

	1		232.884GB			232.250GB		400h
	2		232.884GB			232.250GB		389h
	3		Disk Unformatted
	4		232.884GB			000.008GB		400h
	5			No Disk Detected
	6			No Disk Detected

[REC]:Start Format				[STOP]:Change HDD

		All Format			Information			Return

Step 4

Since the replace HDD is unformatted yet, format the HDD (☞ page 35).

36

Image 36

Panasonic WJ-RT416V manual Stop power supply to the HDD, When completing the HDD replacement, press the SET button

Contents

WJ-RT416V For Your Safety Please Read the Following Text CARE- Fully Class 1 Laser Product Important Notice for U.S. fileds only Disclaimer of warranty Limitation of liability Important safety instructions Contents Precautions Cleaning Product disposal/transferIndication label MPEG-4 Visual patent portfolio license Features PrefaceVarious Recording Functions About these operating instructions Trademarks and registered trademarks Major operating controls and their functions Front View 4Escape button ESC 5Set button SET6Stop button Stop 7Play/Pause button PLAY/PAUSE Rear View 7Power cord inlet AC Connect the provided power cord to this inlet When displaying images on a 16-split screen Example When displaying images from camera channelImage display 040000PM Startup Start up the recorder as follows Adjustment of the clock of the recorder Display the setup menu by pressing the Setup buttonSystem Setup window will be displayed When playing recorded images, stop playback Shutdown of the recorderTo shut down the recorder, do the following Press the Stop button Available functions when displaying live images Monitor live images from the camerasDisplay images on a single screen Display images from cameras on a multi-screen Sequential display on a single screen Sequential display on a 4-split screen Timer recording Alarm recordingRecording Manual recording Available functions when playing images PlaybackFast forward playback/Fast reverse playback Pausing Skip playbackFrame by frame forward playback Frame by frame reverse playback Search and play Camera NoStart Search and play with multiple search filters SearchedStart/End Filtering Search result window will be displayed Alarm function Action at an event occurrence alarm action Cancel the alarm action Records alarm logsStarts recording automatically Alarm recording Copying Duplicate Display the Copy window by pressing the Copy button Copy List window will be displayed Log in as a different user Log outUser Management window will be displayed Log Operation restriction differences between the user levels Maintenance window will be displayed Disk managementCheck HDD information Disk Management window will be displayed Capacity UsedHour Meter Format the HDD Format only the selected HDDFormat all the HDDs Display the Disk Management window Stop power supply to the HDD When completing the HDD replacement, press the SET buttonDisk Management window will be displayed again Since the replace HDD is unformatted yet, format the HDD Restore HDD management information Operate the recorder using a PC Functions and their descriptionsSystem requirements for a PC Installation HDD safety modeInstallation When completing the installation, press the SET button HDD replacement HDD addition Rack mounting Connection Basic connection Connection with RS485 cameras RS485 cable WV-CA48/50 When connecting a single unit with a controller Connection with PS·Data systems DIP switches Connection with a PC Connect the recorder and a PC directlyAdd the recorder to the existing network Operation Accessible number Add the recorder to a broadband WAN Wide Area Network OFF Audio IN/ALARM OUT terminal Pin No Signal Operation RemarkRS485 Camera port Alarm IN/CONTROL terminal Setup menu Setup menu chart Basic operation of the setup menu Configure the system settings System Setup Auto Adjust Time Default Off Summer Time DSTDefault Off Summer Time DST Table Default Search Time Configure the recording settings Recording Setup Configure the common recording settings Common Setup Advanced Setup Default 4 Sec ResolutionDefault Field Time Per File Configure the manual recording settings Manual Rec. Setup Configure the timer recording settings Timer Rec. Setup Configure the alarm action settings Event Setup Alarm BuzzDefault On Alarm Spot Default On Configure the alarm recording settings Alarm Rec. Setup VMD Area Setup Set the VMD area Default 030 sec Alarm DurationAlarm Output Port Alarm Spot Camera No Configure the display settings Display Setup Default AllCamera Allocation Setup Status Display Type ProtocolCompensation Configure the network settings Network Setup Configure the RS485 settings RS485 Setup Configure the PS·Data settings PS.Data Setup Default None Stop Bit Default 1 bit Retry TimingAlarm Data Default 1 s Camera Number Setup Restrict the operable functions User Level Setup Set the password Password Refer to page 31 for how to log out of the recorderLogout of the recorder Logout Maintenance functions Maintenance Check the alarm log Alarm LogCheck the Error Log Error Log Current Temperature Highest Temperature Check the system information System InformationManage the HDDs Disk Management Following can be checked Reset the current settings to the default Factory Default Reboot the recorder Reboot SystemFollowing information will be displayed for Type Monitor User number 1 20, a Auto Login User TC YYYY-MM-DD Hhmmss Restore Default SettingsAccess Log Check the detailed information Advanced Information Firmware Update Operation using the system controller OperationWJ-RT416 WV-CU650 Available only when the search window is PlayStop playback Fast forward/slow playback Troubleshooting Symptom 13, 49 58-60 Symptom Specifications GeneralInput/Output Function Standard accessories Recording time length Panasonic System Solutions Company For business users in the European UnionPanasonic Canada Inc Panasonic Sales Company