Panasonic WJ-RT416V manual Alarm IN/CONTROL terminal

ALARM IN/CONTROL terminal

!3 q

		ALARM IN/CONTOROL
		@5	!4
Pin No.	Signal	Operation		Remark
q	Alarm input CH1	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
w	Alarm input CH2	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
e	Alarm input CH3	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
r	Alarm input CH4	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
t	Alarm input CH5	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
y	Alarm input CH6	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
u	Alarm input CH7	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
i	Alarm input CH8	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
o	Alarm input CH9	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
!0	Alarm input CH10	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
!1	Alarm input CH11	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
!2	Alarm input CH12	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
!3	Alarm input CH13	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
!4	Alarm input CH14	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
!5	Alarm input CH15	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
!6	Alarm input CH16	An event action will be taken according		Non-voltage make contact input, pulse
		to the setting.		width: 100 ms or more
		The clock of the recorder will be set to		Non-voltage make contact input, pulse
!7	Time adjust input	00 (min) by signal input. (Time correc-		width: 100 ms or more
		tion range: ±15 minutes)
		Signal output upon an error detection
		(Thermal error (47 °C {117 °F} or high-		Open collector output, 100 mA or less,
!8	Error output	er), fan error, video loss, password
				24 V DC max.
		entry failure (3 times straight incorrect
		password entry), no HDD detection)
!9	HDD error output	Signal output upon a HDD error detec-		Open collector output, 100 mA or less,
		tion		24 V DC max.
@0- @4 (Signal GND)
@5	(N.C.)	Not available

50