Search and play with multiple search filters
The following search filters are available for search and play.
• Camera CH: | Only recorded images of the selected camera channels will be searched. |
• Start/End: | Images recorded in the period designated by entering the start time and end time will be searched. |
• Filtering: | Images recorded by the designated recording type (Manual recording/Timer recording/Alarm recording) and |
| the alarm recording type (Terminal alarm recording/VMD alarm recording/command alarm recording) will be |
| searched. |
Screenshot 1
Display the search window by pressing the [SEARCH] but- ton twice.
Step 1
Move the cursor onto each setup item and set the search filter.
Camera No.
Start
End
Filtering
List Search
01
Off
Camera No.
Enter the camera channel number to be searched using the camera selection buttons (1 - 10/0).
Start/End
Designate the time period to be searched by entering the start and end time and date using the camera selection buttons (1 - 10/0).
[SEARCH]:Time & Date Search
OK |
| Cancel |
Filtering
Select the recording type and the alarm recording type to be searched using the skip buttons (s d).
Off: Searches without filtering
Manual: Searches for only images recorded manually
Timer: Searches for only images recorded by the timer recording
Alarm: Searches for only images recorded by the alarm recording (Terminal alarm recording/VMD alarm record- ing/command alarm recording)
Terminal: Searches for only images recorded by the termi- nal alarm recording
VMD: Searches for only images recorded by the VMD alarm recording
Com: Searches for only images recorded by the alarm recording triggered by a command alarm reception
Step 2
When determining the filter settings, move the cursor onto "OK" and press the [SET] button.
Note:
When "00" is entered for "Camera No.", all of the camera channels will be searched.
25
