Prevent condensation from forming on the surface of the hard disk.
If this happens, do not turn on the power of the recorder and leave the recorder for around 2 hours.
Wait until the dew evaporates in any of the following cases:
•The recorder is placed in an extremely humid place.
•The recorder is placed in a room where a heater has just been turned on.
•The recorder is moved from an
When the unit has not been used for a certain period, turn on the power of the unit (approximately once a week), and perform recording/playback to prevent interferences with functions.
Avoid placing receptacles that contain liquids such as water near the unit.
If liquid spills onto the unit, it may cause fire or an electric shock.
Cleaning
Turn the power off when cleaning the unit. Otherwise it may cause injuries.
Do not use strong or abrasive detergents when cleaning the unit body.
Use a dry cloth to clean the unit when it is dirty.
When the dirt is hard to remove, use a mild detergent and wipe gently.
When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.
Product disposal/transfer
Images saved on the hard disk drives may lead to personal information leakage. When it is necessary to dispose or give this product to someone, even when for repair, make sure that there is no data on the hard disk drives.
Indication label
Refer to the indication label placed on the surface of the unit as to the indications of equipment classification and power source, etc.
Just in case, make a note of your settings and save them. They are helpful when you are required to change the sys- tem configuration, or when unexpected trouble or failure occurs.
Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export laws of the software provided with this product, is expressly prohibited.
MPEG-4 Visual patent portfolio license
This product is licensed under the
See http://www.mpegla.com.
8
