Panasonic WJ-RT416V manual Type, Protocol, Compensation

Configure the settings relating to the camera control [Camera Control Setup]

Configure the communication type for the camera control and the cable compensation setting for each channel.

		Camera Control Setup
		Type	Protocol	Compensation
Cam 1		Coax	Panasonic		S
Cam 2		Coax	Panasonic		S
Cam 3		Coax	Panasonic		S
Cam 4
		Coax	Panasonic		S
Cam 5
		PSD	Panasonic		S
Cam 6
		PSD	Panasonic		S
Cam 7
		PSD	Panasonic		S
Cam 8
		PSD	Panasonic		S
	9 - 16		OK		Cancel

		Camera Control Setup
		Type	Protocol
Cam 9		PSD	Panasonic
Cam 10		PSD	Panasonic
Cam 11		PSD	Panasonic
Cam 12		PSD	Panasonic
Cam 13		PSD	Panasonic
Cam 14		PSD	Panasonic
Cam 15		PSD	Panasonic
Cam 16		PSD	Panasonic
	1 - 8		OK	Cancel

■Type

Select a camera control method from the following.

Coax: Control the camera using the coaxial communica- tion. (Cam 1 - 8 are available (Cam 5-8 are available only when an optional board is installed).)

RS485: Control the cameras using the RS485 communica- tion.

Off: Do not control the cameras.

Default: Coax (Cam 1 - 4), PSD (Cam 5 - 16)

■Protocol

Select "Panasonic" when "RS485" is selected for "Type". Default: Panasonic

■Compensation

Select the cable length when "Coax." is selected for "Type". (Cam 1 - 8 are available (Cam 5-8 are available only when an optional board is installed).)

It is necessary to configure to control the camera using the coaxial communication.

S:Suitable when the total cable length between the camera

and the recorder is shorter than 500 m

M:Suitable when the total cable length between the cam- era and the recorder is 500 - 900 m

L:Suitable when the total cable length between the camera

and the recorder is 900 - 1 200 m Default: S

Notes:

•To display the "Camera Control Setup" page for camera channels 9-16, click the [9-16] button.

•The setting of compensation (cable loss) will be ignored when receiving any alarm from cameras during commu- nication setup.

Important:

Stop recording before changing the settings relating to the camera control. Otherwise, the cable compensation setting (Comp.) may not be saved.

62