Polycom Version 1.4.x 17 manual Per-phone Configuration phone1.cfg, Registration reg

Administrator Guide - SoundPoint® IP / SoundStation® IP Optimization

4.6.3 Per-phone Configuration - phone1.cfg

This section covers the parameters in the per-phone example configuration file phone1.cfg. This file would normally be used as a template for the per-phone config- uration files. For more information, see 2.2.2.1.3 Deploying a Boot Server for the Phones on page 13.

4.6.3.1 Registration <reg/>

SoundPoint® IP 300 supports two unique registrations, IP 500 supports three and IP 600 supports six. Each registration can optionally be associated with a private array of servers for completely segregated signaling. SoundStation® IP 4000 supports a single registration.

In the following table, x is the registration number. IP 300: x=1-2; IP 500: x=1-3; IP

600: x=1-6; IP 4000: x=1

Attribute	Permitted	Default	Interpretation
	Values
reg.x.displayName	UTF-8 encoded	Null	Display name used for local user
	string		interface as well as SIP signaling.
reg.x.address	string in the for-	Null	The actual address corresponding
	mat userPart or		to this registration (userPart or
	user-		userPart@polycom.com). For user
	Part@domain		part only registration
			(reg.x.address=”1002”), the regis-
			tration will be userPart@proxy-
			HostNameOrIPAddress where
			userPart is reg.x.address and proxy-
			HostNameOrIPAddress is either
			reg.x.server.1.address if non-Null
			or voIpProt.server.1.address speci-
			fied in sip.cfg.
reg.x.label	UTF-8 encoded	Null	Text label to appear on the display
	string		adjacent to the associated line key.
			If omitted, the label will be derived
			from the user part of reg.x.address.
reg.x.type	private OR	private	If set to private, use standard call
	shared		signaling.
			If set to shared, augment call sig-
			naling with call state subscriptions
			and notifications and use access
			control for outgoing calls.

Copyright © 2004 Polycom, Inc. 121