Administrator Guide - SoundPoint® IP / SoundStation® IP Optimization
Copyright © 2004 Polycom, Inc 105
4.6.1.16.2 Scheduled Logging Parameters <scheduled/>

The phone can be configured to schedule certain advanced logging tasks on a periodic

basis. These attributes should be set in consultation with Polycom. Each scheduled

log.render.level 0-6 1 Specifies the lowest class of
event that will be rendered to
the log files. This is the output
filter from the internal mem-
ory-based log system.
log.render.type 0-2 2 See above table for timestamp
type.
log.render.realtime 0, 1 1 Set to 1. Do not change.
log.render.stdout 0, 1 1 Set to 1. Do not change.
log.render.file 0, 1 1 Set to 1. Do not change.
log.render.file.size positive
integer
16 Maximum local application
log file size in Kbytes. When
this size is exceeded, the file is
uploaded to the boot server
and the local copy is erased.
log.render.file.upload.period positive
integer
172800 Time in seconds between log
file uploads to the boot server.
Note: The log file will not be
uploaded if no new events
have been logged since the last
upload.
log.render.file.upload.append 0, 1 1 If set to 1, use append mode
when uploading log files to
server.
log.render.file.upload.append.sizeLimit positive
integer
512 Maximum log file size on boot
server in Kbytes.
log.render.file.upload.append.limit-
Mode
delete, stop delete Behavior when server log file
has reached its limit.
delete=delete file and start
over, stop=stop appending to
file.
Attribute
Permitted
Values Default Interpretation