Polycom Version 1.4.x 17 manual Security security, Password Lengths pwd/length

Administrator Guide - SoundPoint® IP / SoundStation® IP Optimization

log task is controlled by a unique attribute set starting with log.sched.x where x identi- fies the task.

Attribute	Permitted	Interpretation
	Values
log.sched.x.name	alphanu-	Name of an internal system command to be periodically
	meric string	executed. To be supplied by Polycom.
log.sched.x.level	0-5	Event class to assign to the log events generated by this
		command. This needs to be the same or higher than
		log.level.change.slog for these events to appear in the log.
log.sched.x.period	positive	Seconds between each command execution. 0=run once
	integer
log.sched.x.startMode	abs, rel	Start at absolute time or relative to boot.
log.sched.x.startTime	positive	Seconds since boot when startMode is rel or the start time in
	integer OR	24-hour clock format when startMode is abs.
	hh:mm
log.sched.x.startDay	1-7	When startMode is abs, specifies the day of the week to
		start command execution. 1=Sun, 2=Mon, ..., 7=Sat

4.6.1.17 Security <security/>

These settings affect security aspects of the phone.

Attribute	Permitted	Default	Interpretation
	Values
sec.tagSerialNo	0, 1	0	If set to 1, the phone may advertise its serial num-
			ber (Ethernet address) via protocol signaling.

4.6.1.17.1 Password Lengths <pwd/><length>

Attribute	Permitted	Default	Interpretation
	Values
sec.pwd.length.admin	0-32	1	Password changes will need to be at least
			this long. Use 0 to allow null passwords.
sec.pwd.length.user	0-32	2

106 Copyright © 2004 Polycom, Inc.