Polycom Version 1.4.x 17 manual Message Waiting Indication, Distinctive Incoming Call Treatment

Administrator Guide - SoundPoint® IP / SoundStation® IP Features

audio files. The default sample audio files may be replaced with alternates in .wav file format. Supported .wav formats include:

•mono G.711 (13-bit dynamic range, 8-khz sample rate),

•mono L16/1600 (16-bit dynamic range, 16-kHz sample rate).

Note

The alternate sampled audio sound effect files must be present on the boot server or the Internet for downloading at boot time.

	Configuration File:	Specify patterns used for sound effects and the individual
	ipmid.cfg	tones or sampled audio files used within them.
Central		For more information, see:
(boot		• 4.6.1.1.3 Call Progress Tones <callProgTones> on
server)		page 68
		• 4.6.1.4 Sampled Audio for Sound Effects
		<sampled_audio/> on page 72
		• 4.6.1.5 Sound Effects <sound_effects/> on page 73
	Web Server	Specify sampled audio wave files to replace the built-in
	(if enabled)	defaults. Navigate to:
		http://<phoneIPAddress>/coreConf.htm#sa
Local		Changes are saved to local flash and backed up to <Ethernet
		address>phone-.cfg on the boot server and will permanently
		override global settings unless deleted via the Reset User Set-
		tings menu selection.
	Local Phone User	None.
	Interface

3.1.11 Message Waiting Indication

The phone will flash a message-waiting indicator LED when instant messages are waiting, and it can be configured to do so when voice messages are waiting.

3.1.12 Distinctive Incoming Call Treatment

The phone can automatically apply distinctive treatment to calls containing specific attributes. The distinctive treatment that can be applied includes customizable alerting sound effects and automatic call diversion or rejection. Call attributes that can trigger distinctive treatment include the calling party name or SIP contact (number or URL format).

24 Copyright © 2004 Polycom, Inc.